Wagner Tuning Single Turbo Performance Intercooler Kit - BMW F80 M3 / F82/F83 M4 / F87 M2 Competition

Regular price $3,290.95

Black Friday price: $3,126.40 (applied in cart)

SKU: WGT200001124.ST

Add To Wishlist

Converting an S55 to a single turbo changes the whole charge air path, and the factory twin turbo intercooler plumbing no longer fits the job. The Wagner Tuning single turbo performance intercooler kit is built for exactly that setup on the F80 M3, F82/F83 M4 and F87 M2 Competition.

It keeps the S55's water-to-air layout but swaps in a far larger core with 3 inch connections, so a big single turbo has the cooling and flow it needs.

For Single Turbo Conversions Only

This kit only fits cars that have already been converted to a single turbo. It will not work on a stock twin turbo S55. For a twin turbo car, see the Wagner Tuning Competition intercooler kit for the S55.

114% More Core Volume

The tube-fin competition core measures 287 x 185 x 115 mm for 6.10 liters of external volume, against 276 x 136 x 76 mm and 2.85 liters for the stock intercooler. That is 114% more volume. The cast aluminum end tanks were designed in CAD and refined with CFD simulation for even flow and low back pressure.

What's Included

  • 1x Wagner Tuning performance intercooler for single turbo S55 builds
  • 1x installation instructions

Key Features

  • 6.10 liter core, 114% more volume than the 2.85 liter stock intercooler
  • Tube-fin competition core measuring 287 x 185 x 115 mm
  • 3 in (76mm) Vibrant connections
  • CFD-optimized cast aluminum end tanks
  • 100% pressure resistant with a heat-conductive anti-corrosion coating
  • Up to 4 years warranty from Wagner Tuning
  • Manufacturer part number 200001124.ST

Vehicle Fitment

Fits single turbo converted BMW M models with the S55 engine:

  • BMW F80 M3 Sedan (2015-2018)
  • BMW F82 M4 Coupe (2015-2020)
  • BMW F83 M4 Convertible (2015-2020)
  • BMW F87 M2 Competition (2019-2021): needs slight adjustments under the hood

Not for stock twin turbo S55 engines or the N55 F87 M2.

Installation Notes

Installation follows the included instructions. Because this kit is part of a single turbo build, have it installed by the shop doing the turbo conversion.

  1. Drain the low-temperature (charge air) coolant circuit.
  2. Remove the factory intercooler.
  3. Install the Wagner Tuning intercooler and connect it to the single turbo charge piping.
  4. Refill and bleed the low-temperature circuit and check every connection for leaks.

Emissions

This part has no CARB Executive Order. It is not legal for sale or use on pollution-controlled vehicles in California and is intended for off-road and competition use.