Wagner Tuning Front Mounted Charge Cooler Radiator - BMW F80 M3 / F82/F83 M4 / F87 M2 Competition

Regular price $1,140.95

Black Friday price: $1,083.90 (applied in cart)

SKU: WGT400001003.FM

Add To Wishlist

Your S55 intercooler is only as good as the water feeding it. That water runs through a separate low-temperature circuit, and the front radiator on that circuit is what pulls the heat out. On a hot day or a long session, the stock radiator falls behind and charge temps creep up.

The Wagner Tuning front mounted radiator replaces it with a much larger core, so the coolant reaching your intercooler stays colder and your power stays consistent.

89% More Cooling Volume

The stock front radiator measures 590 x 308 x 25 mm with 4.5 liters of core volume. The Wagner Tuning unit measures 568 x 468.4 x 32 mm with 8.5 liters, which is 89% more volume and 46.4% more frontal area (2660.5 cm² vs 1817 cm²). It uses a competition racing core and still leaves enough airflow for the engine radiator behind it.

What's Included

  • 1x front mounted radiator for the low-temperature (charge air) circuit
  • 1x installation instructions

Key Features

  • 8.5 liter core volume, 89% more than the 4.5 liter stock radiator
  • 46.4% more frontal area than stock
  • Competition racing core for maximum heat transfer
  • Heat-conductive anti-corrosion coating
  • Pairs with the Wagner Tuning Competition intercooler kit for the S55
  • Manufacturer part number 400001003.FM

Vehicle Fitment

Fits BMW M models with the S55 engine:

  • BMW F80 M3 Sedan (2015-2018)
  • BMW F82 M4 Coupe (2015-2020)
  • BMW F83 M4 Convertible (2015-2020)
  • BMW F87 M2 Competition (2019-2021)

Not for the 2016-2018 F87 M2 with the N55 engine. This kit replaces the front radiator only, not the side mounted radiators.

Installation Notes

Ships from Wagner Tuning in Germany, usually in about five working days. Installation follows the included instructions and is close to plug and play.

  1. Remove the front bumper cover.
  2. Drain the low-temperature coolant circuit.
  3. Remove the factory front radiator and install the Wagner Tuning radiator in its place.
  4. Refill and bleed the low-temperature circuit, check for leaks, then refit the bumper.