Wagner Tuning EVO3 Competition Intercooler Kit - BMW F30 335i / F32 435i (N55 Non-xDrive)

Regular price $1,590.95

Black Friday price: $1,511.40 (applied in cart)

SKU: WGT200001183

Add To Wishlist

The N55 335i and 435i make easy power with a tune, then run into the same wall: a small factory intercooler that heat soaks. The Wagner Tuning EVO3 kit replaces it with a core big enough for heavily tuned and track-driven cars, so intake temps stay down pull after pull.

It comes as a complete kit with the pipe, ducting, hoses and a new cross member, so you are not hunting for extra parts on install day.

223% More Volume

The EVO3 core measures 510 x 345 x 180 mm (stepped) for 23.56 liters of volume, up from 7.3 liters stock. That is 223% more volume and 165% more flow area. The internal turbulators and CFD-optimized cast end tanks keep flow even across the core, and the ports grow to 65mm in and 76mm out in place of the factory click connections. The core is pressure-stable to 6 bar.

What's Included

  • 1x EVO3 Competition intercooler
  • 1x 76mm intercooler pipe
  • 1x external air duct
  • 2x silicone hoses
  • 1x aluminum adapter
  • 1x cross member
  • 1x mounting hardware set
  • 1x installation instructions

Key Features

  • 23.56 liter core, 223% more volume than the 7.3 liter stock intercooler
  • 165% more flow area (1759.5 cm² vs 663 cm²)
  • 65mm inlet and 76mm outlet for higher flow and less back pressure
  • Internal turbulators and CFD-optimized cast aluminum end tanks
  • Pressure-stable to 6 bar, 13.8 kg
  • Heat-conductive anti-corrosion coating
  • Manufacturer part number 200001183

Vehicle Fitment

Fits rear-wheel-drive BMW models with the N55 engine:

  • BMW F30 335i Sedan (2012-2015)
  • BMW F34 335i Gran Turismo (2014-2016)
  • BMW F32 435i Coupe (2014-2016)
  • BMW F36 435i Gran Coupe (2015-2016)

Not for xDrive models or the F33 435i Convertible. Not for the B58 340i or 440i.

Installation Notes

The kit is delivered ready to install with its own cross member. Expect to remove the front bumper. A professional installer is recommended.

  1. Remove the front bumper cover, the factory intercooler and its pipe.
  2. Install the supplied cross member and external air duct.
  3. Mount the EVO3 intercooler, then fit the 76mm pipe, aluminum adapter and silicone hoses.
  4. Check every clamp and connection, then refit the bumper.

Emissions

This part has no CARB Executive Order. It is not legal for sale or use on pollution-controlled vehicles in California and is intended for off-road and competition use.