Wagner Tuning EVO3 Competition Intercooler Kit - BMW F22 M235i / F87 M2 (N55 Non-xDrive)

Regular price $1,590.95

Black Friday price: $1,511.40 (applied in cart)

SKU: WGT200001144

Add To Wishlist

The N55 in the F87 M2 and M235i responds well to a tune, but the factory intercooler runs out of room quickly. Push past stock boost and charge temps climb, especially in summer or back to back pulls. The Wagner Tuning EVO3 is the big-core answer for builds that need it.

This is a serious piece. The core is more than three times the volume of the stock cooler, the connections are upsized and the kit comes with its own cross member so it mounts properly.

223% More Volume

The EVO3 core measures 510 x 345 x 180 mm (stepped) for 23.56 liters of volume against 7.3 liters stock. That is 223% more volume and 165% more flow area (1759.5 cm² vs 663 cm²). Wagner Tuning drops the factory click-on connections and opens the ports up to 65mm on the inlet and 76mm on the outlet, then adds a 76mm aluminum pipe to carry that flow to the engine. The core is tested pressure-stable to 6 bar.

What's Included

  • 1x EVO3 Competition intercooler with cast aluminum end tanks
  • 1x 76mm aluminum intercooler pipe
  • 1x modified cross member

Key Features

  • 23.56 liter core, 223% more volume than the 7.3 liter stock intercooler
  • 165% more flow area than stock
  • 65mm inlet and 76mm outlet in place of the factory click connections
  • CFD-optimized cast aluminum end tanks for low back pressure
  • Pressure tested to 6 bar
  • 13.8 kg with a heat-conductive anti-corrosion coating
  • Manufacturer part number 200001144

Vehicle Fitment

Fits rear-wheel-drive BMW models with the N55 engine:

  • BMW F87 M2 Coupe (2016-2018): N55
  • BMW F22 M235i Coupe (2014-2016)

Not for xDrive models, the F23 M235i Convertible or the F87 M2 Competition with the S55 engine.

Installation Notes

Ships from Wagner Tuning in Germany, usually in about five working days. Because of the core's size, the radiator support needs minor adjustment during install. A professional installer is recommended.

  1. Remove the front bumper cover and the factory intercooler with its pipes.
  2. Install the supplied modified cross member.
  3. Make the minor radiator support adjustments described in the instructions.
  4. Mount the EVO3 intercooler and the 76mm pipe, then check every connection before refitting the bumper.

Emissions

This part has no CARB Executive Order. It is not legal for sale or use on pollution-controlled vehicles in California and is intended for off-road and competition use.