Wagner Tuning Competition Intercooler Kit - BMW F80 M3 / F82/F83 M4 / F87 M2 Competition

Regular price $1,590.95

Black Friday price: $1,511.40 (applied in cart)

SKU: WGT200001124

Add To Wishlist

The S55 cools its charge air through a small water-to-air intercooler, and on a tuned M3 or M4 that stock core heat soaks fast. Intake temps climb, the DME pulls timing and the car feels flat by the third pull. The Wagner Tuning Competition intercooler gives that circuit a much bigger core so temps stay put when you lean on it.

It bolts in where the factory unit sits, uses the stock mounting points and needs no cutting. If you run a tune, bigger turbos or track days, this is the cooling upgrade that keeps the power you paid for.

Why a Competition Intercooler for the S55

Wagner Tuning sized the core at 287 x 185 x 115 mm, which works out to 6.10 liters of external core volume against 2.85 liters for the stock part. That is 114% more volume to soak up heat. The cast aluminum end tanks were designed in CAD and refined with CFD flow simulation so air spreads evenly across the core and pressure loss stays low.

A heat-conductive anti-corrosion coating protects the core and helps it shed heat over the long term.

What's Included

  • 1x Wagner Tuning Competition intercooler
  • 1x mounting hardware set
  • 1x installation instructions

Key Features

  • 6.10 liter core, 114% more volume than the 2.85 liter stock intercooler
  • Competition core measuring 287 x 185 x 115 mm
  • CFD-optimized cast aluminum end tanks for even flow and low pressure drop
  • Built to 100% pressure stability
  • Heat-conductive anti-corrosion coating
  • Direct 1:1 replacement for the OEM intercooler with plug-and-play fitment
  • Manufacturer part number 200001124

Vehicle Fitment

Fits BMW models with the S55B30 engine:

  • BMW F80 M3 Sedan (2015-2018): M3, M3 Competition, M3 CS
  • BMW F82 M4 Coupe (2015-2020): M4, M4 Competition, M4 CS, M4 GTS
  • BMW F83 M4 Convertible (2015-2020): M4, M4 Competition
  • BMW F87 M2 Competition (2019-2021)

Not for the 2016-2018 F87 M2 with the N55 engine. For that car, see the Wagner Tuning EVO3 intercooler kit for the F87 M2 N55.

Installation Notes

This is a direct swap for the factory intercooler in its stock location. The low-temperature coolant circuit has to be drained and refilled, so bleed the system fully before driving.

  1. Drain the low-temperature (charge air) coolant circuit.
  2. Remove the factory intercooler and its connections.
  3. Install the Wagner Tuning intercooler using the factory mounting points and the supplied hardware.
  4. Reconnect all lines, refill and bleed the low-temperature circuit, then check for leaks.

Emissions

This part has no CARB Executive Order. It is not legal for sale or use on pollution-controlled vehicles in California and is intended for off-road and competition use.