Want the M-inspired mirror profile without exposed carbon? AutoTecknic Version II M-Inspired Painted Mirror Covers replace the factory caps on your BMW F30 3-Series, F32 or F36 4-Series, F22 2-Series, F87 M2, F20 1-Series or E84 X1, and arrive painted in your BMW factory color. Match your body for a clean OEM+ look, or go contrast with black.
You get a matched driver and passenger pair, ready to install.
Painted Mirror Covers in BMW Factory Colors
Each cover is built on an ABS core, painted to the BMW factory paint code and finished in a UV-resistant clear coat for gloss and color retention. Choose from:
- Alpine White (300)
- Black Sapphire Metallic (475)
- Jet Black (668)
- Mineral Grey Metallic (B39)
- Estoril Blue (B45)
- Long Beach Blue (C16)
- Unpainted ABS, ready for your body shop to prep and paint
Paint is mixed to the factory code, but older or resprayed cars can drift from factory color. If your car has been repainted or has years of sun on it, the unpainted option lets your local shop blend to your actual paint.
Direct Replacement for Your OEM Mirror Caps
These covers replace your factory caps at the OEM mounting points instead of taping over them, so there is no added bulk and nothing to cut or trim. Your factory caps come off intact, so you can go back to stock anytime.
What's Included
- 1x driver side painted mirror cover
- 1x passenger side painted mirror cover
Key Features
- Version II M-inspired profile replaces the factory mirror caps
- ABS core painted to BMW factory paint codes with UV-resistant clear coat
- Six factory colors or unpainted ABS
- Mounts at the OEM mounting points, no cutting or trimming
- Sold as a matched driver and passenger pair
Vehicle Fitment
Confirmed fitment, including LCI models:
- BMW F20/F21 1-Series (2012-2019): non-US market models including M135i and M140i
- BMW F22 2-Series Coupe (2014-2021) and F23 2-Series Convertible (2015-2021): including M235i and M240i
- BMW F87 M2 (2016-2018): base M2 only
- BMW F30 3-Series Sedan (2012-2019) and F31 3-Series Sports Wagon (2014-2019)
- BMW F34 3-Series Gran Turismo (2014-2019)
- BMW F32 4-Series Coupe and F33 4-Series Convertible (2014-2020)
- BMW F36 4-Series Gran Coupe (2015-2020)
- BMW E84 X1 (2013-2015)
Not compatible with:
Installation Notes
Most owners install these at home in under 30 minutes with a plastic trim tool. Work slowly. The factory clips are the only thing holding the cap in place, and they are easier to break when cold.
- Fold the mirror and tilt the mirror glass inward to reach the back of the factory cap.
- Release the factory cap clips with a plastic trim tool and pull the cap off.
- Line up the AutoTecknic cover with the OEM mounting points.
- Press evenly around the edge until every clip seats.
- Repeat on the other side and check that the mirror folds and adjusts normally.
