Your X7 is a big, upright SUV, and the LCI front bumper ends in a tall, plain lower edge that makes the nose look heavier than it is. The SQ-Aero Dry Carbon Fiber Front Lip Set runs along that edge and gives the front end a sharper, lower line, so it looks finished instead of flat.
All three pieces are pre-preg dry carbon fiber with a gloss clear coat, not a wrap, vinyl film or hydro-dipped plastic. The set is shaped for the front bumper on the 2023-2027 G07 X7 LCI, in both xDrive40i M Sport and M60i form.
Dry Carbon Fiber Front Lip for the BMW G07 X7 LCI
Pre-preg carbon is cured under heat and pressure, so it comes out lighter and stiffer than wet-lay carbon and the weave stays consistent from piece to piece. The gloss clear coat gives the carbon depth and protects it from UV and road grime, which matters on a part that sits this close to the pavement.
This set is made for the LCI bumper only. The 2019-2022 Pre-LCI X7 uses a different front bumper, so it will not fit those cars. If you are not sure which bumper you have, the LCI is the one with the split headlights introduced for 2023.
What's Included
- 1 x SQ-Aero dry carbon fiber front lip set (3 pieces)
Key Features
- 100% pre-preg dry carbon fiber, not a wrap or vinyl film
- Gloss clear coat finish with UV protection
- 3-piece construction, so each section can be fitted and adjusted on its own
- Shaped to the G07 X7 LCI M Sport front bumper
- Fits xDrive40i M Sport and M60i
Vehicle Fitment
Fits US-market BMW G07 X7 LCI models with the M Sport front bumper:
- G07 X7 LCI (2023-2027): xDrive40i M Sport, M60i
Not compatible with the 2019-2022 Pre-LCI X7, non-M Sport front bumpers or the ALPINA XB7.
Part number: SQ-007
Installation Notes
Professional installation is recommended. A lip this wide has to line up across the whole bumper, so take your time on the test fit.
- Clean the lower edge of the front bumper with isopropyl alcohol and let it dry fully.
- Test-fit all three pieces and check the gaps along the bumper before mounting anything.
- Mount the set with the supplied hardware, following the factory bumper line.
- Recheck the fit and alignment after a short drive.
