MMX Performance Wheel Stud Kit Conical Seat - BMW / MINI M14x1.25

Regular price $204.32

Black Friday price: $194.10 (applied in cart)

SKU: MMR37-1501-70T

Add To Wishlist

If you take your wheels off often, you know the routine with factory wheel bolts: hold the wheel up, line up the holes, try not to hit the caliper, and hope the first bolt does not cross-thread.

The MMX wheel stud kit swaps the bolts for a stud and nut setup, so the wheel hangs on fixed studs while you fit the nuts.

Wheel Stud Kit for Faster, Safer Wheel Changes

The studs make every wheel change quicker and cut the risk of cross-threading. More thread engagement also gives better clamping force and more even load spread than factory bolts. It suits cars on spacers or wider aftermarket wheels, and anyone pulling wheels for track days, brake work, or seasonal tires.

Built for Street and Track

The studs are heat-treated high-strength steel with a corrosion-resistant finish and an internal 6mm Allen drive for accurate fitting. The open-ended aluminum nuts have a conical seat, which suits most aftermarket wheels, an oversize 19mm hex, and a knurled collar for finger grip. This is not a locking or security kit.

What's Included

  • MMX wheel studs in your selected length
  • Matching conical seat aluminum wheel nuts

Key Features

  • Converts factory wheel bolts to studs and nuts
  • M14x1.25 thread
  • Heat-treated high-strength steel studs, internal 6mm Allen drive
  • Conical seat aluminum nuts with 19mm hex and knurled collar
  • Maximum vehicle weight 2,500kg
  • 1-year manufacturer warranty, designed and tested in the UK

Vehicle Fitment

Fits BMW and MINI models with M14x1.25 wheel threads. Choose the stud length for your spacer:

  • No spacer, or spacers up to 10mm: 70mm studs (MMR37-1501-70T)
  • Spacers from 10mm to 20mm: 80mm studs (MMR37-1501-80T)
  • Wheels must use a conical (tapered) lug seat

Check your thread size and wheel seat type before ordering. For ball seat wheels, choose the MMX ball seat stud kit. This item is non-returnable.

Installation Notes

Professional installation is recommended. Clean anodized parts with mild soap and water only. Acidic or alkaline wheel cleaners, solvents, abrasives, and harsh car wash chemicals such as traffic film remover will damage the finish.

  1. Remove the wheels. Clean the hub threads and the short end of each stud with brake cleaner so both are free of dirt and grease.
  2. Check that the stud shank passes cleanly through the brake disc holes without bottoming on the disc.
  3. Apply a thin coat of high-temperature threadlocker (Loctite 2422 or equivalent) to the short end, then thread each stud into the hub with a 6mm Allen key until the shank seats, about 30 ft-lbs (40Nm). Do not overtighten.
  4. Let the threadlocker cure for about three hours, fit the wheels, and torque the nuts with a 19mm socket to the factory wheel bolt specification. Re-check torque after about 30 minutes of driving.