MMX Performance Wheel Stud Kit Ball Seat - BMW / MINI M14x1.25

Regular price $204.32

Black Friday price: $194.10 (applied in cart)

SKU: MMR37-1501-70B

Add To Wishlist

Most BMW wheels use a conical lug seat, but some aftermarket wheels, including certain OZ Racing and BBS designs, use a spherical ball seat instead. Put a conical nut on one of those and it never seats properly.

The MMX ball seat wheel stud kit gives those wheels a stud and nut conversion with the correct seat profile.

Ball Seat Wheel Stud Kit

Swapping the factory bolts for studs makes wheel changes faster and more accurate and removes the risk of cross-threading on repeat changes. The knurled outer collar gives you finger grip when mounting the wheel, so one person can do it safely. Check your wheel's lug seat before ordering, because ball seat and conical seat parts are not interchangeable.

Stronger Than the Factory Bolt

Each stud is heat-treated high-carbon steel, chrome finished, with an internal 6mm Allen drive for controlled torque and an 8mm unthreaded shank for brake disc clearance. Each stud is rated for cars up to 2,500kg and exceeds the shear strength of the OE bolt. The open-ended nuts are 7000-series aluminum in midnight black gloss anodizing, with a 19mm hex that is bigger than the 17mm OE bolt head and less likely to strip.

What's Included

  • MMX wheel studs, M14x1.25, in your selected length
  • Matching ball seat 7000-series aluminum wheel nuts

Key Features

  • Ball seat nuts for wheels with a spherical lug bore
  • M14x1.25 thread, internal 6mm Allen drive
  • 8mm unthreaded shank for brake disc clearance
  • 19mm oversize hex nuts
  • Maximum vehicle weight 2,500kg
  • 70mm (MMR37-1501-70B) or 80mm (MMR37-1501-80B)
  • 1-year manufacturer warranty, designed and tested in the UK

Vehicle Fitment

Fits the following BMW and MINI models with ball seat aftermarket wheels:

  • BMW F20 1 Series (2011-2019)
  • BMW F22 / F23 2 Series (2014-2021)
  • BMW F30 / F31 3 Series (2012-2019)
  • BMW F32 / F33 4 Series (2014-2020)
  • BMW F80 M3 (2015-2018)
  • BMW F82 M4 (2015-2020) and F83 M4 Convertible (2015-2020)
  • BMW F87 M2, M2 Competition, and M2 CS (2016-2021)
  • BMW G20 3 Series (2019-2026)
  • BMW G22 / G23 4 Series (2021-2026)
  • BMW G80 M3 (2021-2026)
  • BMW G81 M3 Touring (2023-2026)
  • BMW G82 M4 (2021-2026)
  • BMW G83 M4 Convertible (2022-2026)
  • BMW G87 M2 (2023-2026)
  • MINI F56 Cooper S and JCW (2014-2024)
  • MINI R56 / R57 Cooper (2007-2015)

Choose 70mm for no spacer or up to 10mm, and 80mm for 10mm to 20mm spacers. Verify your wheel's lug seat before ordering. This item is non-returnable.

Installation Notes

Professional installation is recommended. Clean anodized parts with mild soap and water only. Acidic or alkaline wheel cleaners, solvents, abrasives, and harsh car wash chemicals such as traffic film remover will damage the finish.

  1. Remove the wheels. Clean the hub threads and the short end of each stud with brake cleaner so both are free of dirt and grease.
  2. Check that the stud shank passes cleanly through the brake disc holes without bottoming on the disc.
  3. Apply a thin coat of high-temperature threadlocker (Loctite 2422 or equivalent) to the short end, then thread each stud into the hub with a 6mm Allen key until the shank seats, about 30 ft-lbs (40Nm). Do not overtighten.
  4. Let the threadlocker cure for about three hours, fit the wheels, and torque the nuts with a 19mm socket to the factory wheel bolt specification. Re-check torque after about 30 minutes of driving.