MMX Performance Ultimate Track Differential Kit - BMW G87 M2 / G80 M3 / G82 M4

Regular price $3,920.49

Black Friday price: $3,724.47 (applied in cart)

SKU: MMR55-0003

Add To Wishlist

If your G8X sees regular track time, the rear differential is working harder than BMW planned for. It moves on its mounts, the oil runs hot, and the exhaust bakes the CV boots.

The MMX Ultimate Track Differential Kit is the full MMX rear differential package: mounting, geometry, oil capacity, cooling, and CV boot protection in one box.

The Complete Track Differential Kit

It starts with the same four-point mounting system as the MMX 4-point lift kit: billet front cradle, dual differential mount, and two raised poly bushes. Run it at OEM height, or +10mm on a lowered car to correct driveshaft angles and reduce CV joint and axle wear.

The high-capacity baffled sump adds up to 2 liters (2.1 quarts) of oil, an internal windage tray, cooling fins, and a -8AN port for an external cooler. The dual mount bolts straight to it with no extra hardware. The output shaft heat shield set protects the rear CV boots from exhaust heat, especially on cars with an aftermarket exhaust.

What's Included

  • (1) MMX front differential lift mount / cradle (MMR55-1604)
  • (1) MMX dual differential mount (MMR55-1606) with hardware
  • (2) MMX rear differential raised poly bushes (MMR55-1605)
  • (1) MMX high-capacity baffled differential sump (MMR55-1600) with windage tray, magnetic drain plug and seal, fill plug and seal, M22 to -8AN adapter, and hardware
  • (1) MMX rear output shaft heat shield set (MMR55-1607) with hardware
  • Optional: BMW RTV sealant (83190404517), selectable at checkout

Key Features

  • Four-point differential mounting at OEM height or +10mm
  • Up to 2 liters (2.1 quarts) more differential oil capacity
  • Internal windage tray and cooling fins
  • -8AN port for an external diff cooler
  • Heat shields for the rear output shaft CV boots
  • 6061-T6 billet aluminum cradle, dual mount, and sump
  • Direct fit, no modification required
  • Fits RWD and xDrive models
  • MMX part number MMR55-0003

Vehicle Fitment

Fits the following S58-powered BMW models, RWD and xDrive:

  • BMW G80 M3 (2021-2026)
  • BMW G81 M3 Touring (2023-2026)
  • BMW G82 M4 (2021-2026)
  • BMW G83 M4 Convertible (2022-2026)
  • BMW G87 M2 (2023-2026)

Installation Notes

Professional installation is recommended. The front cradle and both rear bushes must be set to the same position, OEM height or +10mm. The sump needs fresh differential oil and BMW RTV sealant.

  1. Lift the car level and drain the differential oil.
  2. Replace the factory sump with the MMX sump using sealant.
  3. Set the cradle and both bushes to the same height, then install the cradle, rear bush, and dual mount.
  4. Mount the heat shields between the exhaust and the output shaft CV boots.
  5. Torque all fasteners to the BMW specification, refill the differential oil, and check for leaks after a short drive.