MMX Performance One-Piece Crank Hub Upgrade Kit - BMW S55 / N55

Regular price $730.46

Black Friday price: $693.94 (applied in cart)

SKU: MMR20-1001

Add To Wishlist

The factory crank hub on the N55 and S55 is a three-piece assembly held in place by friction. Under load it can slip, and when it does, crankshaft timing moves with it. That is one of the best-known weak points on these engines.

The MMX one-piece crank hub upgrade kit replaces that assembly with a single billet part, so there are no separate friction sections left to slip against each other.

One-Piece Crank Hub, No Crankshaft Drilling

The hub is CNC machined from billet EN36 steel and heat treated with 0.75mm case hardening for the surface hardness and wear resistance a timing component needs. This unpinned version does not require drilling the crankshaft for dowels, and MMX recommends it for stock through Stage 1 tuned N55 and S55 engines.

Add the Capture Plate

Choose the version with the MMX capture plate and the crank bolt head is mechanically locked so it cannot back out under engine vibration. For builds past Stage 1, MMX recommends the 4-pin crank hub kit instead.

What's Included

  • (1) MMX one-piece billet crank hub
  • (1) New crank bolt
  • MMR20-1003FK only: (1) MMX billet crank hub capture plate with hardware

Key Features

  • Replaces the factory three-piece crank hub
  • CNC-machined billet EN36 steel, 0.75mm case hardened
  • Unpinned, no crankshaft drilling required
  • Recommended for stock through Stage 1 tuned engines
  • Available with or without the capture plate
  • MMX part numbers MMR20-1001 (hub) and MMR20-1003FK (hub with capture plate)

Vehicle Fitment

Fits BMW N55 and S55 engines, including these models:

  • BMW F80 M3 (2015-2018), S55
  • BMW F82 M4 (2015-2020), S55
  • BMW F83 M4 Convertible (2015-2020), S55
  • BMW F87 M2 (2016-2018), N55
  • BMW F87 M2 Competition (2019-2021), S55
  • BMW F87 M2 CS (2020-2021), S55

Also fits N55-powered F20 / F21 M135i, F22 / F23 M235i, F30 / F31 3 Series, F32 / F33 4 Series, and F36 4 Series Gran Coupe models. Confirm your engine code before ordering.

Installation Notes

Professional installation is required. This is a critical engine timing component and must be installed with the engine locked at the correct timing position using the proper crank bolt torque procedure.

  1. Lock the engine at the correct timing position with the appropriate BMW timing tools.
  2. Remove the front accessories and the factory crank hub assembly.
  3. Install the MMX one-piece hub with the new crank bolt, torqued to 100Nm plus 270 degrees.
  4. Fit the capture plate if supplied, then confirm timing before starting the engine.