MMX Performance Lowering Spring Set - MINI F55 / F56 / F57 Cooper S / JCW / GP3

Regular price $332.01

Black Friday price: $315.41 (applied in cart)

SKU: MMR08-1401

Add To Wishlist

The F-generation MINI already turns in sharply, but it sits nose-up from the factory with a gap over the tires that softens the look.

The MMX lowering spring set levels the stance and sharpens the handling, without turning a daily car into a track special.

Lowering Springs Built for the F5X MINI

The springs drop the front about 20mm and the rear about 25mm. That difference is deliberate. It removes the factory nose-up rake under load, tightens turn-in, and gives the car a more planted stance. The rates are matched to the OE damping, so the car still rides like a MINI.

Static or Adaptive Dampers

The springs are developed to work with both static and dynamic (adaptive) dampers, so they suit cars with passive suspension and cars with the optional electronically controlled units. They use the factory upper and lower spring perches, so nothing else needs to change.

What's Included

  • (2) Front lowering springs
  • (2) Rear lowering springs

Key Features

  • About 20mm front and 25mm rear drop
  • Rates matched to the OE damping
  • Works with static and adaptive dampers
  • Uses the factory spring perches
  • 1-year manufacturer warranty, designed and tested in the UK
  • MMX part number MMR08-1401

Vehicle Fitment

Fits the following MINI models:

  • MINI F55 Cooper S and JCW Hardtop 4 Door (2015-2024)
  • MINI F56 Cooper S and JCW Hardtop 2 Door (2014-2024), including GP3
  • MINI F57 Cooper S and JCW Convertible (2016-2024)

Contact us to confirm fitment for your car before ordering.

Installation Notes

Spring compressors are required. Professional installation is recommended, and a wheel alignment is needed afterward.

  1. Lift the car, support it safely, and remove the wheels.
  2. Remove the front struts and rear springs following the MINI procedure.
  3. Compress and swap in the MMX springs using the factory perches.
  4. Reinstall, torque the suspension hardware at ride height, and get a full alignment.