MMX Performance Lowering Spring Set - BMW G90 M5 Sedan / G99 M5 Touring

Regular price $467.77

Black Friday price: $444.38 (applied in cart)

SKU: MMR08-1910

Add To Wishlist

The new M5 is a heavy, complex car, and it carries a lot of air between the tires and the arches. That costs it both looks and body control.

The MMX lowering spring set brings the G90 and G99 closer to the ground and tightens their responses, while keeping every drive mode usable and the long-distance comfort intact.

Lowering Springs for the Hybrid M5

These springs were developed specifically for the G90 and G99 chassis and the hybrid xDrive powertrain. Each set closes up the wheel arches, lowers the center of gravity, reduces body roll, and sharpens turn-in. The progressive rate stays smooth and composed around town and firms up when you drive the car hard.

Tuned Separately for Sedan and Touring

The Sedan and the Touring carry their weight differently, so MMX tuned them separately with different rear drops. Select your car from the dropdown. Go too low or too firm and the factory dampers stop matching the springs. MMX tuned both sets to work with static and Adaptive M dampers.

What's Included

  • (2) Front lowering springs
  • (2) Rear lowering springs

Key Features

  • G90 M5 Sedan (MMR08-1910): about 25mm front and 20mm rear drop
  • G99 M5 Touring (MMR08-1911): about 25mm front and 15mm rear drop
  • Progressive spring rates
  • Compatible with static and Adaptive M dampers
  • Direct bolt-on, no modification required
  • MMX metallic grey powder-coated finish
  • 1-year manufacturer warranty, designed and tested in the UK

Vehicle Fitment

Fits the following BMW models:

  • BMW G90 M5 Sedan (2025-2026): MMR08-1910
  • BMW G99 M5 Touring (2025-2026): MMR08-1911

Choose the set that matches your body style. The rear drop is different on each car.

Installation Notes

Spring compressors are required. Professional installation by a qualified technician is recommended, and a wheel alignment is needed afterward to bring the geometry back into specification at the new ride height.

  1. Lift the car, support it safely, and remove the wheels.
  2. Remove the front struts and rear springs following the BMW procedure.
  3. Compress and swap in the MMX springs.
  4. Reinstall, torque the suspension hardware to the BMW specification at ride height, and get a full alignment.