MMX Performance Lowering Spring Set - BMW G42 2 Series M240i / 230i

Regular price $332.01

Black Friday price: $315.41 (applied in cart)

SKU: MMR08-1701

Add To Wishlist

The G42 2 Series is one of the best-balanced cars BMW makes right now, but it leaves the factory with a gap over the tires that makes it look softer than it drives.

The MMX lowering spring set closes that gap and sharpens turn-in, without giving up the ride that makes the G42 easy to live with every day.

Lowering Springs Tuned for Each G42

MMX makes three versions, and the drop depends on the car. The M240i sits about 20mm lower at the front and 15mm at the rear, in both RWD and xDrive form. The four-cylinder 218i, 220i, and 230i RWD take a deeper 30mm front and 20mm rear drop. Select the version that matches your car from the dropdown.

Works With Your Factory Dampers

The rates are matched to the factory dampers, so the kit works with both static and Adaptive M suspension and nothing else needs to change. The progressive rate stays compliant over low-speed bumps and firms up as load builds, so the car is better controlled when you push it, without bouncing or crashing over rough roads. Each set is finished in MMX metallic grey.

What's Included

  • (2) Front lowering springs
  • (2) Rear lowering springs

Key Features

  • M240i RWD and xDrive: about 20mm front and 15mm rear drop
  • 218i, 220i, and 230i RWD: about 30mm front and 20mm rear drop
  • Progressive spring rates
  • Compatible with static and Adaptive M factory dampers
  • MMX metallic grey finish
  • MMX part numbers MMR08-1701 (M240i xDrive), MMR08-1703 (M240i RWD), MMR08-1702 (218i / 220i / 230i RWD)

Vehicle Fitment

Fits the following BMW models:

  • BMW G42 2 Series Coupe M240i xDrive (2022-2026): MMR08-1701
  • BMW G42 2 Series Coupe M240i RWD (2022-2026): MMR08-1703
  • BMW G42 2 Series Coupe 218i, 220i, and 230i RWD (2022-2026): MMR08-1702

The 218i and 220i are not sold in the US. For a 230i xDrive, contact us before ordering, as no xDrive version is listed for the four-cylinder cars.

Installation Notes

Spring compressors are required. Professional installation by a qualified technician is recommended, and a wheel alignment is needed afterward to bring the geometry back into specification at the new ride height.

  1. Lift the car, support it safely, and remove the wheels.
  2. Remove the front struts and rear springs following the BMW procedure.
  3. Compress and swap in the MMX springs.
  4. Reinstall, torque the suspension hardware to the BMW specification at ride height, and get a full alignment.