MMX Performance Intercooler - MINI F56 Cooper S / JCW (Pre-LCI)

Regular price $936.48

Black Friday price: $889.66 (applied in cart)

SKU: MMR05-1402

Add To Wishlist

The factory intercooler is one of the first limits a tuned F56 hits. Once charge-air temperatures climb, timing gets pulled and power drops on every run that follows.

The MMX performance intercooler fixes that, with a much bigger core in the factory location.

Intercooler With Nearly Twice the Core

The tube-and-fin stepped core has nearly double the volume of the OE unit and 70% more frontal area. That extra capacity means substantially lower charge-air temperatures at sustained throttle and on back-to-back pulls, which is exactly where the factory cooler saturates first.

Consistent Power, Stock or Tuned

On a stock car it keeps power consistent run after run. On a tuned car it gives you the headroom to use the boost your tune asks for, without timing pull hiding the gains. Choose the Cooper S or Cooper S JCW version to match your car. MMX charge pipes are strongly recommended alongside it at higher boost.

What's Included

  • (1) MMX performance intercooler for your selected trim

Key Features

  • Tube-and-fin stepped core
  • About 2x the OE core volume
  • 70% more frontal area than OE
  • Lower charge-air temperatures and better heat-soak resistance
  • Cooper S (MMR05-1402) or Cooper S JCW (MMR05-1401)
  • 1-year manufacturer warranty, designed and tested in the UK

Vehicle Fitment

Fits the following MINI models:

  • MINI F56 Cooper S Hardtop 2 Door, pre-LCI (2014-2018): MMR05-1402
  • MINI F56 JCW Hardtop 2 Door, pre-LCI (2014-2018): MMR05-1401

B46 and B48 engines only. Does not fit cars with the B48D engine code, LCI F56 models, or the F57 Convertible. Confirm your engine code and build before ordering.

Installation Notes

Professional installation is recommended. The front bumper comes off for access. Check local emissions rules before installing intake or boost modifications.

  1. Remove the front bumper and undertray.
  2. Disconnect the charge pipes and remove the factory intercooler.
  3. Fit the MMX intercooler at the factory mounting points and reconnect the charge pipes.
  4. Refit the bumper and check every connection for boost leaks on a test drive.