MMX Performance DCT Transmission Oil Cooler - BMW E90 / E92 / E93 M3

Regular price $851.36

Black Friday price: $808.79 (applied in cart)

SKU: MMR17-0202

Add To Wishlist

The E9X M3's DCT is happy at stock power on a mild day. Put it on track, sit in summer traffic, or bolt on a supercharger, and gearbox oil temperatures climb quickly. A hot DCT shifts slower, and eventually it gets damaged.

The MMX DCT transmission oil cooler replaces the factory cooler with a much higher-capacity core that gives the gearbox real thermal headroom.

DCT Transmission Oil Cooler, Direct Fit

This is not an adapted universal cooler. It is engineered for the E9X M3's factory DCT mounting points and oil routing. Lower oil temps mean more consistent shifts under load, less risk of overheating the clutch packs, and a longer life for one of the most expensive parts on the car.

Who Needs It Most

Supercharged and tuned E9X M3s gain the most, because peak gearbox temperatures are a real reliability concern on those cars. A stock M3 driven hard on a hot day still sees a clear, sustained drop in transmission oil temperature.

What's Included

  • (1) MMX DCT transmission oil cooler

Key Features

  • Substantially higher core capacity than the factory DCT cooler
  • Direct fit to the factory mounting points and oil routing
  • Suits factory-spec, tuned, and supercharged E9X M3s
  • 1-year manufacturer warranty, designed and tested in the UK
  • MMX part number MMR17-0202

Vehicle Fitment

Fits the following DCT-equipped BMW models:

  • BMW E90 M3 Sedan (2008-2011)
  • BMW E92 M3 Coupe (2008-2013)
  • BMW E93 M3 Convertible (2008-2013)

DCT cars only. Does not fit the 6-speed manual E9X M3. Contact us if you want to confirm fitment for your car.

Installation Notes

This job opens the DCT oil circuit, so the fluid level must be checked and corrected afterward using the BMW procedure. Professional installation is recommended.

  1. Lift the car level and support it safely.
  2. Disconnect the DCT oil lines from the factory cooler and remove it.
  3. Install the MMX cooler in the factory mounting points and reconnect the oil lines.
  4. Check and correct the DCT fluid level to the BMW specification, then check for leaks.