MMX Performance 2-Piece Carbon Ceramic Rear Rotor Set 370x24mm - BMW G87 M2 / G80 M3 / G82 M4

Regular price $7,326.93

Black Friday price: $6,960.58 (applied in cart)

SKU: MMR30-1604R

Add To Wishlist

On a G8X driven hard, the rear axle is where iron rotors hit their limit first. The discs are smaller, the heat is more concentrated, and it shows up as a pedal that changes and pads that wear unevenly.

The MMX carbon ceramic rear rotor set finishes the iron-to-carbon-ceramic conversion, bolting straight to your factory iron-brake calipers and hardware with no recalibration.

Carbon Ceramic Rear Rotors for Iron-Brake G8X Cars

Each 370x24mm disc weighs 4.45kg, 46% lighter than the factory steel rotor. The rear axle responds faster, the car feels lighter on its feet, and brake balance stays consistent through repeated heavy stops because the discs run much cooler than iron.

Floating 2-Piece Design

The ceramic ring mounts to a separate anodized black hat so it can expand radially and axially as it absorbs heat, resisting the warping and cracking common in one-piece performance rotors. The cross-drilled face clears gas and pad material under hard use.

What's Included

  • MMX 2-piece carbon ceramic rear rotor set, 370x24mm

Key Features

  • Direct bolt-on replacement for the factory iron rear discs
  • No caliper, bracket, or hardware changes
  • 370mm x 24mm, 4.45kg per disc, 46% lighter than factory steel
  • 2-piece floating design with anodized black hat
  • Cross-drilled rotor face
  • MMX part number MMR30-1604R

Vehicle Fitment

Fits the following BMW models with the factory iron brake system:

  • BMW G80 M3 (2021-2026)
  • BMW G82 M4 (2021-2026)
  • BMW G83 M4 Convertible (2022-2026)
  • BMW G87 M2 (2023-2026)

Not for cars already fitted with factory M Carbon ceramic brakes. For the G81 M3 Touring, contact us before ordering. Pairs with the MMX carbon ceramic front rotor set.

Installation Notes

Professional installation is recommended. Carbon ceramic discs need pads suited to carbon ceramic use and a proper bedding procedure. Contact us for pad recommendations.

  1. Put the electronic parking brake into service mode with a scan tool.
  2. Lift the car, remove the wheels, and remove the rear calipers and factory iron rotors.
  3. Clean the hub faces, fit the MMX carbon ceramic rotors, and reinstall the calipers with carbon ceramic compatible pads.
  4. Torque to the BMW specification, exit service mode, and bed in the pads before hard use.