SAVE $35.79
MMX Performance Bilstein Sport Damper Set Non-EDC - BMW F20 / F22 / F30 / F32 RWD
Black Friday price: $679.92 (applied in cart)
Ten years in, the dampers on most F-chassis BMWs are tired, and the car floats and crashes where it used to feel tight. The MMX Performance Bilstein sport damper set restores that body control and adds a firmer, fast-road edge. It was developed exclusively with Bilstein.
It is a direct OEM replacement for all four corners, with no tune and no modification.
Bilstein Tri-Valve Sport Dampers for F2X / F3X Without EDC
Each damper uses Bilstein's Tri-Valve Technology: three independent hydraulic valves, bump, rebound, and main, working together in a low-pressure nitrogen gas-charged housing. It responds to both low-speed and high-speed shaft movement, so the car feels more compliant over broken pavement and more controlled when you lean on it in a corner.
Height Neutral, Works With Your Springs
The dampers do not set ride height, the springs do. Run them on factory springs for a refreshed OE-height car, or pair them with lowering springs, including the MMX F2X lowering spring kit, for a complete sport suspension. They are tuned for fast road use rather than full track spec, which suits higher-mileage cars where the OEM dampers have faded.
What's Included
Key Features
Vehicle Fitment
Fits rear-wheel drive BMW F-chassis models without Electronic Damper Control (EDC):
Non-EDC cars only. EDC-equipped cars use a different damper interface and are not compatible.
RWD only. xDrive models are not compatible.
Installation Notes
Spring compressors are required. Professional installation is recommended, followed by a wheel alignment.
Ten years in, the dampers on most F-chassis BMWs are tired, and the car floats and crashes where it used to feel tight. The MMX Performance Bilstein sport damper set restores that body control and adds a firmer, fast-road edge. It was developed exclusively with Bilstein.
It is a direct OEM replacement for all four corners, with no tune and no modification.
Bilstein Tri-Valve Sport Dampers for F2X / F3X Without EDC
Each damper uses Bilstein's Tri-Valve Technology: three independent hydraulic valves, bump, rebound, and main, working together in a low-pressure nitrogen gas-charged housing. It responds to both low-speed and high-speed shaft movement, so the car feels more compliant over broken pavement and more controlled when you lean on it in a corner.
Height Neutral, Works With Your Springs
The dampers do not set ride height, the springs do. Run them on factory springs for a refreshed OE-height car, or pair them with lowering springs, including the MMX F2X lowering spring kit, for a complete sport suspension. They are tuned for fast road use rather than full track spec, which suits higher-mileage cars where the OEM dampers have faded.
What's Included
Key Features
Vehicle Fitment
Fits rear-wheel drive BMW F-chassis models without Electronic Damper Control (EDC):
Non-EDC cars only. EDC-equipped cars use a different damper interface and are not compatible.
RWD only. xDrive models are not compatible.
Installation Notes
Spring compressors are required. Professional installation is recommended, followed by a wheel alignment.
Driven by performance and precision, AutoTecknic has been crafting premium carbon fiber and aerodynamic upgrades since 2000. From our Southern California headquarters, we design and engineer parts that elevate both form and function. Built for drivers who demand more from their machines