MMX Performance 5x120 Hubcentric Wheel Spacer Kit - BMW E-Series M12x1.5

Regular price $122.78

Black Friday price: $116.64 (applied in cart)

SKU: MMR37-0212

Add To Wishlist

On most E-Series BMWs the wheels sit too far inside the arch, and the car looks narrower than it really is.

The MMX 5x120 wheel spacer kit moves the wheels out to fill the arches and widen the track, while keeping the wheel centered on the hub where it belongs.

True Hubcentric Wheel Spacers

Each spacer locates on the factory hub register and reproduces that register on its outer face, so the wheel is centered by the hub rather than the wheel bolts. That is what separates a hubcentric spacer from a bolt-centric one, and it is what keeps the wheel running true.

Strong Alloy, Bolts Included

The spacers are machined from 7075-T6 aerospace aluminum, a stronger alloy than most spacer kits use, and finished in black anodizing. Each pair comes with ten extended wheel bolts, five per wheel, in the right length for the width you order. The extra track also creates room behind the wheel for big brake kits and aftermarket suspension.

What's Included

  • (2) MMX hubcentric wheel spacers in your selected width
  • (10) Extended-length wheel bolts, five per wheel

Key Features

  • 12mm per side, 24mm total track increase (MMR37-0212)
  • 15mm per side, 30mm total track increase (MMR37-0215)
  • 18mm per side, 36mm total track increase (MMR37-0218)
  • 7075-T6 aerospace aluminum, black anodized
  • Sold in pairs, so front and rear widths can differ
  • 1-year manufacturer warranty, designed and tested in the UK

Vehicle Fitment

Fits BMW E-Series models with these hub specifications:

  • 5x120 bolt pattern
  • M12x1.5 wheel bolts
  • BMW E-Series hub register

Confirm your car uses this hub before ordering, and contact us if you are not sure.

Installation Notes

Use only the supplied extended bolts. Clean anodized parts with mild soap and water only. Acidic or alkaline wheel cleaners, solvents, abrasives, and harsh car wash chemicals such as traffic film remover will damage the finish.

  1. Lift the car, support it safely, and remove the wheel.
  2. Clean the hub face and seat the spacer flat on the hub register.
  3. Refit the wheel with the extended bolts and torque to the BMW specification.
  4. Check wheel and tire clearance at full steering lock, and re-check torque after the first 50 miles.