MMX Performance 4-Point Differential Lift Kit - BMW G87 M2 / G80 M3 / G82 M4

Regular price $1,755.85

Black Friday price: $1,668.06 (applied in cart)

SKU: MMR55-0002

Add To Wishlist

From the factory, a G8X differential hangs on just three mounting points. Under launches, hard braking, and big torque changes, it moves, and that movement leads to diff and CV seal weep.

The MMX 4-point differential lift kit adds a fourth mounting point that BMW never used, and lets you lift the diff +10mm to correct driveshaft angles on a lowered car.

Four-Point Differential Lift Kit

The billet front cradle replaces the factory front mount. One raised poly bush replaces the factory rear bush. The MMX dual differential mount adds an all-new rear support structure at a secondary bush location that sits unused on the factory car, and the second raised poly bush goes in there. Four points of contact hold the diff far more firmly than the factory setup.

OEM Height or +10mm

Set every point to OEM height to control diff movement while keeping factory geometry. On a lowered car, set every point to +10mm to bring the driveshaft angles back in line and cut heat and wear on the CV joints and axle shafts.

What's Included

  • (1) MMX front differential lift mount / cradle (MMR55-1604)
  • (1) MMX dual differential mount (MMR55-1606) with hardware
  • (2) MMX rear differential raised poly bushes (MMR55-1605), one for the factory rear mount and one for the dual mount

Key Features

  • Four-point differential mounting
  • OEM height or +10mm raised, set at install
  • Helps prevent diff and CV seal weep caused by movement
  • Corrects driveshaft angles on lowered cars
  • 6061-T6 billet aluminum cradle and dual mount
  • 80A durometer polyurethane bushes
  • Direct fit, no modification required
  • Fits RWD and xDrive models
  • MMX part number MMR55-0002

Vehicle Fitment

Fits the following S58-powered BMW models, RWD and xDrive:

  • BMW G80 M3 (2021-2026)
  • BMW G81 M3 Touring (2023-2026)
  • BMW G82 M4 (2021-2026)
  • BMW G83 M4 Convertible (2022-2026)
  • BMW G87 M2 (2023-2026)

Installation Notes

All parts install in factory mounting locations with no modification. The front cradle and both rear bushes must be set to the same position, either OEM height or +10mm.

  1. Lift the car and support the differential.
  2. Remove the factory front differential mount and rear differential bush.
  3. Choose OEM or +10mm and set the cradle and both bushes to the same position.
  4. Install the cradle, the rear bush, and the dual mount with its bush.
  5. Torque all fasteners to the BMW specification.