MMX Performance 3-Point Differential Lift Kit - BMW G87 M2 / G80 M3 / G82 M4

Regular price $1,049.90

Black Friday price: $997.40 (applied in cart)

SKU: MMR55-0001

Add To Wishlist

Lower a G8X and the rear driveshafts end up running at a steeper angle. That extra angle means more heat and faster wear on the CV joints and axle shafts.

The MMX 3-point differential lift kit fixes the geometry with a +10mm diff lift, or firms up the diff mounting at factory height if your car is stock.

Differential Lift Kit: Two Heights, One Kit

The billet front cradle replaces the factory front differential mount, and the raised polyurethane bush replaces the factory rear differential bush. Install both in the OEM position for a firmer diff connection with factory geometry, or flip both to the raised position to lift the differential 10mm and bring the driveshaft angles back in line on a lowered car.

Where This Kit Fits in the Lineup

The 3-point kit is the foundation of the MMX G8X differential system. The 4-point kit adds the dual differential mount and a second raised bush. The Ultimate Track Differential Kit adds the baffled sump and output shaft heat shields on top of that.

What's Included

  • (1) MMX front differential lift mount / cradle (MMR55-1604)
  • (1) MMX rear differential raised poly bush (MMR55-1605)

Key Features

  • OEM height or +10mm raised, set at install
  • Corrects driveshaft angles on lowered cars
  • Reduces drivetrain movement under load
  • Works with OEM and aftermarket axle shafts
  • 6061-T6 billet aluminum front cradle
  • 80A durometer polyurethane rear bush
  • Minimal NVH increase for road and track use
  • Fits RWD and xDrive models
  • MMX part number MMR55-0001

Vehicle Fitment

Fits the following S58-powered BMW models, RWD and xDrive:

  • BMW G80 M3 (2021-2026)
  • BMW G81 M3 Touring (2023-2026)
  • BMW G82 M4 (2021-2026)
  • BMW G83 M4 Convertible (2022-2026)
  • BMW G87 M2 (2023-2026)

Installation Notes

Both parts install in the factory mounting locations with no modification. The front cradle and rear bush must be set to the same position, either OEM height or +10mm. Never mix the two.

  1. Lift the car and support the differential.
  2. Remove the factory front differential mount and rear differential bush.
  3. Choose OEM or +10mm and set the cradle and bush to the same position.
  4. Install both parts and torque all fasteners to the BMW specification.