MMX Performance 2-Piece Floating Front Rotor Set 380x36mm - BMW G87 M2 / G80 M3 / G82 M4

Regular price $1,791.59

Black Friday price: $1,702.01 (applied in cart)

SKU: MMR30-1601F

Add To Wishlist

The S58 makes it easy to arrive at the end of a straight very fast. On a hot track day, the factory one-piece front rotors heat up, fade creeps in, and judder shows up in the pedal.

The MMX 2-piece floating front rotor set is a direct bolt-on replacement for your factory iron front discs that runs cooler, weighs less, and keeps the pedal consistent session after session.

Why 2-Piece Floating Rotors

The 380x36mm rotor rings mount to separate hats, so the ring can expand under heat instead of fighting itself like a one-piece rotor. That resists warping and judder, extends pad and rotor life, and lets MMX use larger directional cooling vanes for up to 30% better cooling efficiency versus OE. The result is lower peak temperatures and less fade across consecutive hard stops.

Bolt-On, No Other Changes

No caliper, bracket, or pad changes are required. Rotors come as left and right directional units, and the J-hook slotted face clears gas and pad material without the cracking risk of aggressive cross-drilling on iron.

What's Included

  • (1) Pair of MMX 2-piece floating front rotors, left and right

Key Features

  • 2-piece floating design: rotor ring and separate hat
  • 380mm x 36mm, direct replacement for OE iron front discs
  • Up to 30% better cooling efficiency versus OE
  • Lighter than OEM, reducing unsprung and rotating mass
  • J-hook slotted face, directional left and right units
  • MMX part number MMR30-1601F

Vehicle Fitment

Fits the following BMW models with factory iron brakes:

  • BMW G80 M3 (2021-2026)
  • BMW G81 M3 Touring (2023-2026)
  • BMW G82 M4 (2021-2026)
  • BMW G83 M4 Convertible (2022-2026)
  • BMW G87 M2 (2023-2026)

Not for cars with factory carbon ceramic brakes. Pairs with the MMX 370mm rear rotor set and RP650 pads.

Installation Notes

A straightforward rotor swap with basic tools. New pads and a proper bed-in are recommended.

  1. Lift the car, remove the wheels, and unbolt the front calipers and carriers.
  2. Remove the factory rotors and clean the hub faces.
  3. Install the MMX rotors on the correct sides, then refit the carriers and calipers.
  4. Torque everything to specification and bed in the pads before hard use.