In an SUV, the sunglasses problem is worse. The cupholder is further away, the console is deeper, and anything you set on the dash catches every pothole. You need them accessible and protected — two things no cupholder has managed at the same time.

The AutoTecknic Grab Handle Sunglasses Case mounts flush at your Mercedes-Benz headliner, right above your sightline, exactly where glasses should live. Press once, it drops open. Grab and close. When it's shut, it blends into the roofline trim as if Mercedes built it in.

How It Works

The case clips into the existing mount point at your overhead console, sitting tight against the headliner when closed. A spring-loaded clip inside holds glasses securely without pressure damage to lenses or frames. The housing is color-matched to Mercedes-Benz light grey headliner interiors, so closed, it reads as factory.

What's Included

  • 1x Grab handle sunglasses case (color per variant selected)
  • Mounting hardware for headliner clip installation

Key Features

  • Overhead headliner mount — clips into the existing overhead console position
  • Spring-loaded drop-open mechanism for instant one-press access
  • Interior spring clip holds glasses securely without lens or frame damage
  • Flush-close profile sits tight against the headliner with no gap or rattle
  • Color-matched housing blends with Mercedes-Benz light grey headliner interiors
  • Available in Black and Grey to match your cabin
  • No permanent modification to your vehicle required

Vehicle Fitment

Compatible with the following Mercedes-Benz SUV and crossover models:

  • X166 GL (2013-2016): GL350, GL450, GL550, GL63 AMG
  • X156 GLA (2015-2019): GLA250, GLA45 AMG
  • H247 GLA (2020-2026): GLA250, GLA35 AMG, GLA45 AMG
  • X253 GLC (2016-2022): GLC300, GLC43 AMG, GLC63 AMG — SUV, Coupe
  • X254 GLC (2023-2026): GLC300, GLC43 AMG — SUV, Coupe
  • X247 GLB (2020-2026): GLB250, GLB35 AMG
  • X166 GLS (2017-2019): GLS450, GLS550, GLS63 AMG
  • X167 GLS (2020-2026): GLS450, GLS580, GLS600 Maybach, GLS63 AMG
  • W464 G-Class (2019-2026): G550, G63 AMG
  • X294 EQE SUV (2023-2026): EQE 350+, EQE 500 4MATIC+, AMG EQE 43, AMG EQE 53

Installation Notes

Installs at the existing clip mount at the overhead console position. No tools required for most installations.

  1. Locate the existing clip mount at the overhead console, typically near the grab handle position
  2. Align the case mounting tabs with the headliner clips
  3. Press firmly until the case snaps securely into position
  4. Test the drop-open function and confirm no movement or rattle

Note: If your vehicle has an existing factory overhead sunglasses holder, this product will not fit. Confirm your overhead console position is unoccupied before ordering.