H&R VTF Adjustable Lowering Spring Kit - Porsche 992 911 Carrera 4 Coupe / Cabriolet (2020-2024)

Sale price $1,422.00 Regular price $1,580.00

Black Friday price: $1,350.90 (applied in cart)

SKU: 23020-1

Add To Wishlist

The 992 Carrera 4 is the everyday all-wheel drive 911, and adjustable springs let you dial in a drop that fills the wide rear arches without giving up daily usability. H&R VTF Adjustable Lowering Springs do it with height-adjustable spring perches on the 992 Carrera 4, and you keep your factory dampers.

H&R lists an adjustment range of about 1.2 to 1.6 in. of drop up front and 1.0 to 1.4 in. at the rear. The kit works with PASM and the front-axle lift system. Exact lowering varies with engine and options.

How H&R VTF Adjustable Lowering Springs Work on the 992 Carrera 4

VTF stands for Verstellbar TieferlegungsFedern, German for adjustable lowering springs. Precision collars and spring perches let you fine-tune ride height after install, so you can start with a mild drop and go lower later. H&R tunes the spring rates to work with the factory dampers, including PASM, for less body roll and a ride that stays suited to the street.

Thinking about coilovers instead? VTF gives you adjustable ride height for less than a full coilover kit, and because the factory dampers stay, the car keeps its original damping behavior, PASM modes included.

What's Included

  • Complete H&R VTF kit for front and rear lowering (H&R part 23020-1)
  • Precision adjustment collars and spring perches

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.2 to 1.6 in. front and 1.0 to 1.4 in. rear adjustable lowering (H&R figures)
  • Works with PASM and the front-axle lift system
  • Designed to work with the factory dampers, including PASM
  • Precision adjustment collars and spring perches
  • Made in Germany and TÜV approved
  • H&R part number 23020-1

Vehicle Fitment

The H&R VTF Adjustable Lowering Spring Kit 23020-1 fits these Porsche models:

  • Porsche 992 911 Carrera 4 Coupe and Cabriolet (2020-2024, AWD)

Not sure about your car? Send us your VIN and we will confirm.

Installation Notes

VTF springs take more time than a basic spring swap because you set the ride height during the install. A shop that knows Porsche suspension is the best choice, and plan on an alignment once the final height is set.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts and fit the H&R springs with the adjustable collars and perches.
  3. Install the rear components and set the rear ride height following the H&R instructions in the kit.
  4. Set the front height on the collars, tighten all suspension bolts at ride height, and recheck the height after a short drive.
  5. Get a four-wheel alignment once the final height is set.