H&R TRAK+ DR Wheel Spacers 3-18mm (Pair) - Porsche Macan 95B 5x112

Sale price $89.96 Regular price $99.95

Black Friday price: $85.46 (applied in cart)

SKU: 0655665

Add To Wishlist

The Macan has the proportions of a sports car, but from the factory the wheels sit tucked inside the arches. H&R TRAK+ DR wheel spacers push them out to fill the fenders, and the wider track gives the Macan an even more planted feel on the road.

DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x112 bolt pattern and 66.5mm center bore. The 12mm and 18mm spacers have their own centering lip, so the wheel stays hubcentric. The 3mm and 5mm spacers are flat discs that use the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.

Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers

TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.

DR spacers need longer 14x1.5 wheel bolts, sold separately. Plan new bolts into the same order, and tell us your spacer width and wheels so we can match the right bolt. Need 10mm, 15mm or 20mm? Send us your VIN and we will confirm the right H&R part.

What's Included

  • 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)

Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.

Key Features

  • Widths of 3mm, 5mm, 12mm and 18mm per side
  • Silver or black finish
  • Fits the 5x112 bolt pattern with a 66.5mm center bore
  • Hubcentric centering lip on 12mm and 18mm. The 3mm and 5mm spacers are flat discs.
  • Full contact with the hub face for even load distribution
  • DR design: uses longer 14x1.5 wheel bolts, sold separately
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment and Available Widths

The H&R TRAK+ DR spacers in this listing fit these models:

  • Porsche Macan (2017-2025), Macan S (2015-2025): 3mm, 5mm, 12mm and 18mm
  • Porsche Macan GTS (2017-2018, 2020-2025), Macan Turbo (2015-2018, 2020-2021): 3mm, 5mm, 12mm and 18mm

H&R lists these widths for each model. Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On 3mm, 5mm and 12mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past a 3mm or 5mm spacer to center the wheel, and on the 12mm spacer the hub height and the inner bevel of your wheel must be checked so the wheel seats fully on the spacer.

  1. Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.5 thread and the same head and seat type.
  2. Measure the hub and the wheel as described in the H&R instructions if you are using a 3mm, 5mm or 12mm spacer.
  3. Clean the hub face and remove any rust or scale so the spacer sits flat.
  4. Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
  5. Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
  6. Re-check wheel bolt torque after the first short drive.