H&R TRAK+ DR Wheel Spacers 5-23mm (Pair) - Porsche 911 991/992 Carrera / 996 / 997 / Boxster / Cayman 5x130

Sale price $89.96 Regular price $99.95

Black Friday price: $85.46 (applied in cart)

SKU: 10957161

Add To Wishlist

A 911 or a Boxster looks its best when the wheels sit right at the edge of the fender, and most leave the factory with them tucked in. H&R TRAK+ DR wheel spacers push the wheels out to fill the arches, and the wider track adds stability through corners.

DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x130 bolt pattern and 71.6mm center bore. The 14mm and wider spacers have their own centering lip, so the wheel stays hubcentric. The 5mm and 7mm spacers are flat discs that use the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.

Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers

TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.

DR spacers need longer 14x1.5 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt. Driving a 718 GTS, 718 Spyder or 992 Targa? Those cars use a different H&R spacer, listed separately.

What's Included

  • 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)

Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.

Key Features

  • Widths of 5mm, 7mm, 14mm, 15mm, 18mm and 23mm per side
  • Silver or black finish
  • Fits the 5x130 bolt pattern with a 71.6mm center bore
  • Hubcentric centering lip on 14mm and wider. The 5mm and 7mm spacers are flat discs.
  • Full contact with the hub face for even load distribution
  • DR design: uses longer 14x1.5 wheel bolts, sold separately
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment and Available Widths

The H&R TRAK+ DR spacers in this listing fit these models:

  • Porsche 992 911 Carrera / Carrera S Coupe and Cabriolet (2020-2026), Carrera 4 (2020-2024), Carrera 4S (2020-2026): 5mm, 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 991 911 Carrera / Carrera S (2012-2019), Carrera 4 / 4S (2013-2019), Carrera GTS (2015-2019), Turbo / Turbo S (2014-2019): 5mm, 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 997 911 Carrera / Carrera S / Carrera 4 / Carrera 4S / Turbo (2005-2012): 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 996 911 Carrera / Carrera 4 / Carrera 4S Coupe / Turbo (1999-2005): 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 996 911 Carrera 4S Cabriolet (2004-2005): 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 718 Boxster / Boxster S / Cayman / Cayman S (2017-2025): 5mm, 7mm, 14mm and 15mm
  • Porsche 981 Boxster / Boxster S (2013-2016): 5mm, 7mm, 14mm and 15mm
  • Porsche 981 Cayman / Cayman S (2014-2016): 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 987 Boxster / Boxster S (2005-2012), Boxster Spyder (2011), 987 Cayman / Cayman S (2006-2012): 7mm, 14mm, 15mm, 18mm and 23mm
  • Porsche 986 Boxster / Boxster S (1997-2004): 7mm, 14mm, 15mm, 18mm and 23mm

H&R lists these widths for each model. Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On 5mm and 7mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past the spacer to center the wheel.

  1. Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.5 thread and the same head and seat type.
  2. Measure the hub and the wheel as described in the H&R instructions if you are using a 5mm or 7mm spacer.
  3. Clean the hub face and remove any rust or scale so the spacer sits flat.
  4. Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
  5. Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
  6. Re-check wheel bolt torque after the first short drive.