H&R TRAK+ DR Wheel Spacers 5-15mm (Pair) - Porsche 718 GTS / 718 Spyder / 992 911 Targa 5x130

Sale price $143.96 Regular price $159.95

Black Friday price: $136.76 (applied in cart)

SKU: 10957160Z

Add To Wishlist

The 718 GTS, the 718 Spyder and the 992 Targa all leave the factory with the wheels set inboard of the fender lip. H&R TRAK+ DR wheel spacers push the wheels out to fill the arches and widen the track for more stability through corners.

These cars use a different hub than the regular 911 Carrera and 718, so H&R makes a dedicated version of its DR spacer for them. It keeps the factory 5x130 bolt pattern and 71.6mm center bore, and the 14mm and 15mm spacers have their own centering lip. Choose your width and finish above. Each kit is a pair for one axle.

Why H&R TRAK+ Wheel Spacers Instead of Generic Spacers

TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.

DR spacers need longer 14x1.5 wheel bolts, sold separately. Plan new bolts into the same order, and tell us your spacer width and wheels so we can match the right bolt. Need 18mm? Send us your VIN and we will confirm the right H&R part.

What's Included

  • 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)

Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.

Key Features

  • Widths of 5mm, 7mm, 10mm, 14mm and 15mm per side
  • Silver or black finish
  • Fits the 5x130 bolt pattern with a 71.6mm center bore
  • Made for the 718 GTS, 718 Spyder and 992 Targa hub
  • Full contact with the hub face for even load distribution
  • DR design: uses longer 14x1.5 wheel bolts, sold separately
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment and Available Widths

The H&R TRAK+ DR spacers in this listing fit these models:

  • Porsche 718 Boxster GTS / Cayman GTS (2018-2019, 2021-2025): 5mm, 7mm, 10mm, 14mm and 15mm
  • Porsche 718 Spyder (2020-2025): 5mm, 7mm, 10mm, 14mm and 15mm
  • Porsche 992 911 Targa 4 / Targa 4S (2021-2026): 5mm, 7mm, 10mm, 14mm and 15mm

H&R lists these widths for each model. Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On the thinner spacers, follow the H&R instructions to check that the factory hub still centers the wheel.

  1. Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.5 thread and the same head and seat type.
  2. Measure the hub and the wheel as described in the H&R instructions if you are using a 5mm, 7mm or 10mm spacer.
  3. Clean the hub face and remove any rust or scale so the spacer sits flat.
  4. Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
  5. Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
  6. Re-check wheel bolt torque after the first short drive.