H&R TRAK+ DR Wheel Spacers 5-20mm (Pair) - BMW E70 X5 / E71 X6 5x120 74mm

Sale price $80.96 Regular price $89.95

Black Friday price: $76.91 (applied in cart)

SKU: 1075740

Add To Wishlist

The E70 X5 has a wide, planted stance, but from the factory the wheels sit deep inside the arches. H&R TRAK+ DR wheel spacers push them out to fill the fenders, and the wider track makes the X5 feel steadier through fast corners.

DR is H&R's classic spacer design. It sits between the hub and the wheel and keeps the factory 5x120 bolt pattern and the E70's 74mm center bore. The 12mm and wider spacers have their own centering lip, so the wheel stays hubcentric. The 5mm spacer is a flat disc that uses the factory hub to center the wheel. Choose your width and finish above. Each kit is a pair for one axle.

Why H&R TRAK+ Wheel Spacers on the E70 X5

TRAK+ spacers are made from a proprietary alloy that H&R developed for them. H&R rates it lighter and stronger in tensile strength than 6061-T6 billet aluminum. Each spacer has full contact with the hub face, just like the factory hub, so the load spreads evenly instead of riding on a thin ring.

DR spacers need longer 14x1.25 wheel bolts, sold separately. Your factory bolts lose thread engagement once a spacer is in place, so plan new bolts into the same order. Tell us your spacer width and wheels and we will help you match the right bolt. Need 25mm or 30mm? Those use H&R's DRA bolt-on design, listed separately.

What's Included

  • 2 H&R TRAK+ DR spacers in the width and finish you choose (one axle)

Product photo shows a representative H&R TRAK+ DR spacer. Width, finish and packaging vary by option.

Key Features

  • Widths of 5mm, 12mm, 15mm and 20mm per side
  • Silver or black finish
  • Fits the 5x120 bolt pattern with a 74mm center bore
  • Hubcentric centering lip on 12mm and wider. The 5mm spacer is a flat disc.
  • Full contact with the hub face for even load distribution
  • DR design: uses longer 14x1.25 wheel bolts, sold separately
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment and Available Widths

The H&R TRAK+ DR spacers in this listing fit these models:

  • BMW E70 X5 3.0si / 4.8i / xDrive30i / xDrive35i / xDrive35d / xDrive48i / xDrive50i (2007-2013): 5mm, 12mm, 15mm and 20mm, front and rear
  • BMW E71 X6 xDrive35i / xDrive50i (2008-2014): 5mm, 12mm, 15mm and 20mm, front only
  • BMW E70 X5 M (2010-2013) and E71 X6 M (2010-2014): 5mm, 12mm, 15mm and 20mm, front only

The E71 X6, the E70 X5 M and the E71 X6 M use these 74mm spacers on the front axle only. Their rear hubs take a different H&R spacer, so send us your VIN and we will confirm the rear part before you order. H&R lists these widths for each model.

Installation Notes

DR spacers need longer wheel bolts, which are not included. Order them before your install day. Professional installation is recommended. On the 5mm and 12mm spacers, H&R requires you to measure first. The factory hub must still stick out far enough past a 5mm spacer to center the wheel, and on the 12mm spacer the hub height and the inner bevel of your wheel must be checked so the wheel seats fully on the spacer.

  1. Order wheel bolts that are longer than your current bolts by the spacer width, with the same 14x1.25 thread and the same head and seat type.
  2. Measure the hub and the wheel as described in the H&R instructions if you are using a 5mm or 12mm spacer.
  3. Clean the hub face and remove any rust or scale so the spacer sits flat.
  4. Fit the spacer on the hub, mount the wheel and tighten the new bolts to factory torque in a star pattern.
  5. Turn the wheel by hand and check that nothing rubs. The wheel should spin freely.
  6. Re-check wheel bolt torque after the first short drive.