H&R TRAK+ 15mm Hub Adapter (Pair) - BMW E39 5 Series / E70 X5 / E71 X6 (74mm to 72.5mm)

Sale price $143.96 Regular price $159.95

Black Friday price: $136.76 (applied in cart)

SKU: 3075740725

Add To Wishlist

Picked up a set of wheels from an E46, E9X or F30 and found they will not seat on your E39, X5 or X6? The problem is the center bore. Your car's hub is 74mm. Those wheels are bored at 72.5mm, so they will not slide over the hub at all.

The H&R TRAK+ 15mm Hub Adapter (part 3075740725) fixes that. It mounts on your 74mm hub and gives the wheel a 72.5mm centering lip, so the wheel stays hubcentric the way BMW designed it. You also gain 15mm per side for a fuller stance in the arches.

H&R Hub Adapter vs. a Standard Wheel Spacer

A normal spacer only matches the bore it was made for. It cannot change the bore size, so a 72.5mm wheel still will not fit a 74mm hub. The usual workarounds are machining the wheels or mounting them off-center on the bolts, and neither is a good idea. This adapter changes the bore and adds width in one hubcentric part, with full contact on the hub face.

What's Included

  • 2 H&R TRAK+ 15mm hub adapters (one axle)

Key Features

  • Adapts 5x120 wheels with a 72.5mm center bore to a 74mm hub
  • 15mm width per side
  • Hubcentric on both the hub and the wheel side
  • DR design: uses longer wheel bolts, sold separately
  • Made in Germany
  • Sold as a pair. Order two pairs for all four corners.

Vehicle Fitment

The H&R TRAK+ 15mm Hub Adapter 3075740725 fits these US-market BMW models:

  • BMW E39 5 Series (1997-2003): 525i, 528i, 530i, 540i
  • BMW E70 X5 (2007-2013)
  • BMW E70 X5M (2010-2013)
  • BMW E71 X6 (2008-2014)
  • BMW E71 X6M (2010-2014)

Not for the F15 X5 or F16 X6. Not sure about your car? Send us your VIN and we will confirm before you order.

Installation Notes

DR-type adapters need longer wheel bolts, which are not included. Order these before your install day. Professional installation is recommended.

  1. Order wheel bolts that are 15mm longer than your current bolts, with the same head and seat type as the bolts you are replacing.
  2. Clean the hub face and remove any rust or scale so the adapter sits flat.
  3. Fit the adapter on the hub, mount the wheel and tighten the new bolts to BMW factory torque in a star pattern.
  4. Turn the wheel by hand and check that the bolts do not touch the brake parts or ABS sensor behind the hub. The wheel should spin freely.
  5. Re-check wheel bolt torque after the first short drive.