H&R Sway Bar Kit - Porsche 991 911 Carrera / Carrera S / Carrera 4 / Carrera 4S (2012-2019)

Sale price $1,021.50 Regular price $1,135.00

Black Friday price: $970.42 (applied in cart)

SKU: 72880

Add To Wishlist

The 991 Carrera is beautifully balanced, but on a fast, tight road the body still leans more than the chassis needs. A matched set of stiffer bars keeps the body flatter and makes the car respond faster to the wheel.

The H&R Sway Bar Kit (part 72880) includes a 28mm front bar and 26mm 2-hole adjustable rear bar. The front bar reuses the factory bushings, and both bars bolt in where the factory bars were, with no cutting or drilling. The adjustable rear bar lets you set the balance softer or firmer.

Why an H&R Sway Bar Kit on Your Porsche

A sway bar links the left and right wheels. When the car leans in a corner, the bar twists and pushes back, keeping the body flatter. A stiffer bar means less lean, quicker response to the wheel and a car that settles faster in transitions. Unlike stiffer springs, a sway bar only works when one side compresses more than the other, so ride quality over bumps that hit both wheels stays close to stock.

Because this kit replaces both bars, H&R has already matched the front and rear rates, so the car stays balanced. That is safer than stiffening only one end, which can push the car toward understeer or oversteer.

What's Included

  • H&R front sway bar
  • H&R rear sway bar

Product photo shows a representative H&R sway bar. Color, shape and packaging vary by application.

Key Features

  • 28mm front bar and 26mm 2-hole adjustable rear bar
  • Front and rear rates matched by H&R
  • Bolt-on replacement for the factory bars, no cutting or drilling
  • Cuts body roll while keeping ride quality over bumps close to stock
  • Genuine H&R part, matched to these models by H&R
  • H&R part number 72880

Vehicle Fitment

The H&R Sway Bar Kit 72880 fits these Porsche models:

  • Porsche 991 911 Carrera and Carrera S Coupe and Cabriolet (2012-2019, RWD)
  • Porsche 991 911 Carrera 4 and Carrera 4S Coupe and Cabriolet (2013-2019, AWD)

Not for 911 Turbo, GTS or GT models, or cars with PDCC (Porsche Dynamic Chassis Control). Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a bolt-on job with basic hand tools, a torque wrench and a way to safely lift the car. Access to the bars varies by model, and some panels or other parts have to be moved out of the way first. Professional installation is recommended if you are not comfortable working on suspension.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bars and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the kit.
  4. Repeat for the other bar, then connect the end links to the hole you want to start on.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to Porsche factory spec.