H&R Sway Bar Kit - BMW F22 228i/230i Coupe / F23 228i/230i Convertible (RWD)

Sale price $710.10 Regular price $789.00

Black Friday price: $674.59 (applied in cart)

SKU: 72878

Add To Wishlist

The rear-wheel drive 228i and 230i are balanced, playful small BMWs, but push one hard and the body leans more than the chassis needs. A matched set of stiffer bars keeps the body flatter and makes the car respond faster to the wheel.

The H&R Sway Bar Kit (part 72878) includes a 28mm adjustable front bar and 20mm rear bar. Both bolt in where the factory bars were, with no cutting or drilling. The adjustable front bar lets you set the balance softer or firmer.

Why an H&R Sway Bar Kit on Your BMW F22

A sway bar links the left and right wheels. When the car leans in a corner, the bar twists and pushes back, keeping the body flatter. A stiffer bar means less lean, quicker response to the wheel and a car that settles faster in transitions. Unlike stiffer springs, a sway bar only works when one side compresses more than the other, so ride quality over bumps that hit both wheels stays close to stock.

Because this kit replaces both bars, H&R has already matched the front and rear rates, so the car stays balanced. That is safer than stiffening only one end, which can push the car toward understeer or oversteer.

What's Included

  • H&R front sway bar
  • H&R rear sway bar

Product photo shows a representative H&R sway bar. Color, shape and packaging vary by application.

Key Features

  • 28mm adjustable front bar and 20mm rear bar
  • Front and rear rates matched by H&R
  • Bolt-on replacement for the factory bars, no cutting or drilling
  • Cuts body roll while keeping ride quality over bumps close to stock
  • H&R part number 72878

Vehicle Fitment

The H&R Sway Bar Kit 72878 fits these BMW models:

  • BMW F22 228i Coupe (2014-2016)
  • BMW F22 230i Coupe (2017-2021)
  • BMW F23 228i Convertible (2015-2016)
  • BMW F23 230i Convertible (2017-2021)

Not for xDrive models or the M235i and M240i. Not sure which version your car needs? Send us your VIN and we will confirm before you order.

Installation Notes

This is a bolt-on job with basic hand tools, a torque wrench and a way to safely lift the car. Access to the bars varies by chassis, and on some cars other parts have to be moved out of the way first. Professional installation is recommended if you are not comfortable working on suspension.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory front bar and remove the bushing brackets.
  3. Remove the factory front bar and fit the H&R front bar in its place, following the instructions supplied with the kit.
  4. Repeat the same steps for the rear bar.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.