H&R Street Performance Coilover Kit - Porsche 981 Cayman / Cayman S (2014-2016 w/o PASM)

Sale price $2,412.00 Regular price $2,680.00

Black Friday price: $2,291.40 (applied in cart)

SKU: 28743-1

Add To Wishlist

The 981 Cayman without PASM rides on passive dampers, and a matched coilover kit is the cleanest way to add height adjustment and tighter body control. H&R Street Performance Coilovers replace the 981 Cayman suspension with a matched, height-adjustable setup built for the street.

H&R lists an adjustment range of about 1.2 to 2.0 in. of drop up front and 1.2 to 2.0 in. at the rear. This kit is for cars without PASM. Exact lowering varies with engine and options.

H&R Street Performance Coilovers on the 981 Cayman

H&R pioneered coilovers tuned for the street, and this kit follows that formula. Monotube gas dampers are custom valved to work with H&R progressive rate springs, and the fully threaded shock body lets you set ride height with easy-to-adjust spring seats.

Every coilover install changes more than ride height. Set the height with the car fully assembled, then get an alignment. If the factory dampers are worn, a complete kit replaces them and adds adjustment in one job.

What's Included

  • Height-adjustable front coilover struts
  • Rear coilovers with height adjustment

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.2 to 2.0 in. front and 1.2 to 2.0 in. rear adjustable lowering (H&R figures)
  • For cars without PASM
  • Height adjustable with a fully threaded shock body
  • Monotube gas dampers custom valved for H&R progressive rate springs
  • H&R part number 28743-1
  • Two-year warranty from H&R

Vehicle Fitment

The H&R Street Performance Coilover Kit 28743-1 fits these Porsche models:

  • Porsche 981 Cayman and Cayman S (2014-2016), without PASM

Not for cars with PASM. H&R lists the 981 Cayman from 2013. It was sold in the US from the 2014 model year. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

A coilover install is a bigger job than a spring swap, so most owners have a shop with Porsche experience do it. Check the factory top mounts while the struts are out, and replace them if they are cracked or worn.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts and install the H&R front coilovers.
  3. Replace the rear struts with the H&R rear coilovers.
  4. Set the ride height front and rear, then tighten the suspension bolts at ride height.
  5. Check tire clearance at full lock and under compression, then get a four-wheel alignment.