H&R Street Performance Coilover Kit - BMW E92/E90 M3 Coupe/Sedan (2008-2013)

Sale price $2,232.00 Regular price $2,480.00

Black Friday price: $2,120.40 (applied in cart)

SKU: 50492

Add To Wishlist

The E9X M3 has a high-revving V8, a sound like nothing else BMW has made, and a chassis that wants to be driven hard. H&R Street Performance Coilovers replace the E92/E90 M3 Coupe/Sedan suspension with a matched, height-adjustable setup built for the street.

H&R lists an adjustment range of about 1.0 to 1.6 in. of drop up front and 0.3 to 1.3 in. at the rear.

H&R Street Performance Coilovers on the E92/E90 M3 Coupe/Sedan

H&R pioneered coilovers tuned for the street, and this kit follows that formula. Monotube gas dampers are custom valved to work with H&R progressive rate springs, and the fully threaded shock body lets you set ride height with easy-to-adjust spring seats.

Every coilover install changes more than ride height. Set the height with the car fully assembled, then get an alignment. If the factory dampers are worn, a complete kit replaces them and adds adjustment in one job.

What's Included

  • Height-adjustable front coilover struts
  • Rear dampers and springs with height adjustment

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.0 to 1.6 in. front and 0.3 to 1.3 in. rear adjustable lowering (H&R figures)
  • Height adjustable with a fully threaded shock body
  • Monotube gas dampers custom valved for H&R progressive rate springs
  • H&R part number 50492
  • Two-year warranty from H&R

Vehicle Fitment

The H&R Street Performance Coilover Kit 50492 fits these BMW models:

  • BMW E92 M3 Coupe (2008-2013)
  • BMW E90 M3 Sedan (2008-2013)

Not for cars with electronic damper control (EDC). Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

A coilover install is a bigger job than a spring swap, so most owners have a shop with BMW experience do it. Check your factory top mounts while the struts are out, and replace them if they are cracked or worn.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts and install the H&R front coilovers.
  3. Replace the rear shocks and springs with the H&R rear components.
  4. Set the ride height front and rear, then tighten the suspension bolts at ride height.
  5. Check tire clearance at full lock and under compression, then get a four-wheel alignment.