H&R Sport Spring Kit - Porsche 992 911 Carrera S Coupe / Cabriolet (2020-2026)

Sale price $509.15 Regular price $599.00

Black Friday price: $483.69 (applied in cart)

SKU: 28652-1

Add To Wishlist

The 992 Carrera S already turns in like few cars on the road, but from the factory it sits with more fender gap than its shape deserves, most of all up front. H&R Sport Springs lower the 911 Carrera S and cut body roll, and they work with your factory shocks.

H&R lists about 1.2 in. of drop front and rear on the Carrera S Coupe and Cabriolet. The kit works on cars with PASM and on cars with the front-axle lift system. Exact lowering varies with options, and it can vary on cars with the factory PASM Sport suspension.

Why H&R Sport Springs on the 992 Carrera S

Sport Springs are H&R's best-selling product. The progressive rate design keeps the ride comfortable over rough pavement, while the lower center of gravity reduces body roll and sharpens turn-in. Every spring is wound from 54SiCr6 spring steel and shot-peened, and H&R builds them not to set or sag over time.

Worried about ride quality? H&R tunes Sport Spring rates for daily street use on the factory shocks. Worn shocks are the bigger risk. Tired dampers struggle to control any lowered spring, so if yours have high miles, replace them at the same time.

What's Included

  • 2 front springs
  • 2 rear springs

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.2 in. front and 1.2 in. rear lowering (H&R figures)
  • Works with PASM and the front-axle lift system
  • Works with the factory shocks, no modifications needed
  • Progressive rate design for a comfortable street ride
  • 54SiCr6 spring steel, shot-peened, built not to set or sag
  • Every spring is tested before it leaves H&R's ISO 9001 certified plant in Germany
  • H&R part number 28652-1
  • Limited lifetime warranty from H&R

Vehicle Fitment

The H&R Sport Spring Kit 28652-1 fits these Porsche models:

  • Porsche 992 911 Carrera S Coupe (2020-2026, RWD)
  • Porsche 992 911 Carrera S Cabriolet (2020-2026, RWD)

This listing covers the rear-wheel drive Carrera S. For other 992 models, send us your VIN and we will confirm the right H&R kit.

Installation Notes

This is a standard spring swap for a shop with Porsche suspension experience, and most can do it in a few hours. If you do it yourself, you need a proper strut spring compressor. Never take a strut apart without one.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts, compress the factory springs, and move the top mounts and hardware onto the H&R springs.
  3. Replace the rear springs, following the H&R instructions supplied with the kit.
  4. Tighten the suspension bolts with the car at ride height so the rubber bushings are not preloaded.
  5. Get a four-wheel alignment once the car is back on the ground.