H&R Sport Spring Kit - BMW G22 430i Coupe RWD (2021-2026 w/o Sport Suspension)

Sale price $339.15 Regular price $399.00

Black Friday price: $322.19 (applied in cart)

SKU: 28662-1

Add To Wishlist

The G22 430i Coupe has the long hood and wide stance of a proper grand tourer, but a car built without the factory sport suspension sits high enough to look softer than it drives. H&R Sport Springs lower the G22 430i Coupe and cut body roll, and they work with your factory shocks.

This version is for cars built without the factory sport suspension. On those cars H&R lists about 1.6 in. of drop up front and 1.2 in. at the rear. If your 430i has the factory M Sport suspension, use the sport suspension version of this kit instead.

Why H&R Sport Springs on the G22 430i Coupe

Sport Springs are H&R's best-selling product. The progressive rate design keeps the ride comfortable over rough pavement, while the lower center of gravity reduces body roll and sharpens turn-in. Every spring is wound from 54SiCr6 spring steel and shot-peened, and H&R builds them not to set or sag over time.

Worried about ride quality? H&R tunes Sport Spring rates for daily street use on the factory shocks. Worn shocks are the bigger risk. Tired dampers struggle to control any lowered spring, so if yours have high miles, replace them at the same time.

What's Included

  • 2 front springs
  • 2 rear springs

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.6 in. front and 1.2 in. rear lowering on cars without sport suspension (H&R figures)
  • Works with the factory adaptive suspension
  • Works with the factory shocks, no modifications needed
  • Progressive rate design for a comfortable street ride
  • 54SiCr6 spring steel, shot-peened, built not to set or sag
  • Every spring is tested before it leaves H&R's ISO 9001 certified plant in Germany
  • H&R part number 28662-1
  • Limited lifetime warranty from H&R

Vehicle Fitment

The H&R Sport Spring Kit 28662-1 fits these BMW models without factory sport suspension:

  • BMW G22 430i Coupe (2021-2026, RWD)

Not for xDrive models. Works with the factory adaptive suspension. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a standard spring swap that a suspension shop can handle in a few hours. If you do it yourself, you need a proper strut spring compressor. Never take a front strut apart without one.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts, compress the factory springs, and move the top mounts and hardware onto the H&R springs.
  3. Replace the rear springs, following the H&R instructions supplied with the kit.
  4. Tighten the suspension bolts with the car at ride height so the rubber bushings are not preloaded.
  5. Get a four-wheel alignment once the car is back on the ground.