H&R Sport Spring Kit - BMW F74 228i xDrive Gran Coupe (2025-2026)

Sale price $466.65 Regular price $549.00

Black Friday price: $443.32 (applied in cart)

SKU: 28635-5

Add To Wishlist

The new F74 228i xDrive Gran Coupe sharpened the look of BMW's compact four-door, and a lower stance finishes what the design started. H&R Sport Springs lower the F74 228i xDrive Gran Coupe and cut body roll, and they work with your factory shocks.

H&R lists about 1.2 in. of drop up front and 0.6 in. at the rear on the F74 228i xDrive Gran Coupe. Exact lowering varies with engine and options. Lowering can vary on cars with factory sport suspension.

Why H&R Sport Springs on the F74 228i xDrive Gran Coupe

Sport Springs are H&R's best-selling product. The progressive rate design keeps the ride comfortable over rough pavement, while the lower center of gravity reduces body roll and sharpens turn-in. Every spring is wound from 54SiCr6 spring steel and shot-peened, and H&R builds them not to set or sag over time.

Worried about ride quality? H&R tunes Sport Spring rates for daily street use on the factory shocks. Worn shocks are the bigger risk. Tired dampers struggle to control any lowered spring, so if yours have high miles, replace them at the same time.

What's Included

  • 2 front springs
  • 2 rear springs

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 1.2 in. front and 0.6 in. rear lowering (H&R figures)
  • Works with or without electronic damper control (EDC)
  • Works with the factory shocks, no modifications needed
  • Progressive rate design for a comfortable street ride
  • 54SiCr6 spring steel, shot-peened, built not to set or sag
  • Every spring is tested before it leaves H&R's ISO 9001 certified plant in Germany
  • H&R part number 28635-5
  • Limited lifetime warranty from H&R

Vehicle Fitment

The H&R Sport Spring Kit 28635-5 fits these BMW models:

  • BMW F74 228i xDrive Gran Coupe (2025-2026)

Works with or without electronic damper control (EDC). Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a standard spring swap that a suspension shop can handle in a few hours. If you do it yourself, you need a proper strut spring compressor. Never take a front strut apart without one.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts, compress the factory springs, and move the top mounts and hardware onto the H&R springs.
  3. Replace the rear springs, following the H&R instructions supplied with the kit.
  4. Tighten the suspension bolts with the car at ride height so the rubber bushings are not preloaded.
  5. Get a four-wheel alignment once the car is back on the ground.