H&R RS ID Spring Set - Porsche 991 911 GT3 (2018-2019 w/ PASM)

Sale price $653.65 Regular price $769.00

Black Friday price: $620.97 (applied in cart)

SKU: 54090

Add To Wishlist

The 991 GT3 already rides on factory coilovers with threaded spring perches, but even at the bottom of their range there is fender gap left over the tires. H&R RS ID springs replace the factory springs and let you set the GT3 lower than the stock springs allow.

H&R lists an adjustment range of about 0.75 to 1.5 in. of drop up front and 0.75 to 1.4 in. at the rear, set on the GT3's own threaded perches. The kit works on cars with PASM and with the front-axle lift system. Exact lowering varies with options.

How H&R RS ID Springs Work on the 991 GT3

RS ID is H&R's set of 60mm inner diameter race springs, chosen to work on the GT3's factory threaded shocks. Because the GT3 already has height-adjustable perches, you keep the factory dampers and PASM modes and simply gain more range at the low end. H&R springs are made in Germany.

This is a setup for owners who are comfortable with a track-car install. Plan on setting ride height, corner weights and alignment after the springs go in.

What's Included

  • H&R RS ID spring set for the front and rear axles (H&R part 54090)

Product photo shows a representative H&R kit. Color, shape and packaging vary by application.

Key Features

  • About 0.75 to 1.5 in. front and 0.75 to 1.4 in. rear lowering (H&R figures)
  • 60mm ID race springs for the GT3's factory threaded shocks
  • For cars with PASM, including the front-axle lift system
  • Keeps the factory dampers and PASM modes
  • Made in Germany
  • H&R part number 54090

Vehicle Fitment

The H&R RS ID spring set 54090 fits this Porsche model:

  • Porsche 991.2 911 GT3 (2018-2019, RWD), with PASM and front-axle lift

H&R lists the 991.2 GT3 from 2017. It was sold in the US from the 2018 model year. H&R lists this set for the GT3 only, not the GT3 RS or GT3 Touring. Not sure about your car? Send us your VIN and we will confirm.

Installation Notes

This install is best left to a shop that knows the GT3 chassis. The car has to be set up after the swap, so book the alignment at the same time.

  1. Lift the car and support it on jack stands at the factory lift points.
  2. Remove the front struts and rear shocks, then swap the factory springs for the H&R RS ID springs following the H&R instructions.
  3. Reinstall the struts and shocks and tighten the suspension bolts with the car at ride height so the rubber bushings are not preloaded.
  4. Set ride height on the threaded perches, then corner balance the car.
  5. Get a four-wheel alignment once the final height is set.