H&R Rear Sway Bar 24mm Adjustable - Porsche 981 Boxster / Boxster S / Cayman / Cayman S (2013-2016)

Sale price $521.10 Regular price $579.00

Black Friday price: $495.04 (applied in cart)

SKU: 71879

Add To Wishlist

A mid-engine car lives and dies by its balance, and a stiffer rear bar on the 981 Boxster or Cayman lets you tune how eagerly it turns in and rotates. The H&R bar cuts body roll and helps the car rotate more willingly.

The H&R Rear Sway Bar (part 71879) is a 24mm rear bar with 2-hole adjustment, so you can set it softer or firmer to suit how you drive. It bolts in where the factory bar was, with no cutting or drilling.

Why an H&R Rear Sway Bar on Your Porsche

A sway bar links the left and right wheels. When the car leans in a corner, the bar twists and pushes back, keeping the body flatter. A stiffer bar means less lean, quicker response to the wheel and a car that settles faster in transitions. Unlike stiffer springs, a sway bar only works when one side compresses more than the other, so ride quality over bumps that hit both wheels stays close to stock.

The adjustable arm gives you two settings. Start on the softer hole for the street, and move to the firmer hole if you want even less lean on track days. A stiffer rear bar on its own shifts the balance toward oversteer, so add the matching H&R front bar or the complete kit if you want to keep the factory balance.

What's Included

  • H&R rear sway bar, 24mm, 2-hole adjustable

Product photo shows a representative H&R sway bar. Color, shape and packaging vary by application.

Key Features

  • 24mm rear bar with 2-hole adjustment
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Cuts body roll while keeping ride quality over bumps close to stock
  • Genuine H&R part, matched to these models by H&R
  • H&R part number 71879

Vehicle Fitment

The H&R Rear Sway Bar 71879 fits these Porsche models:

  • Porsche 981 Boxster and Boxster S (2013-2016)
  • Porsche 981 Cayman and Cayman S (2014-2016)

Not for the Boxster Spyder, Cayman GT4 or cars with PDCC. Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a bolt-on job with basic hand tools, a torque wrench and a way to safely lift the car. Access to the bars varies by model, and some panels or other parts have to be moved out of the way first. Professional installation is recommended if you are not comfortable working on suspension.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Connect the end links to the hole you want to start on.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to Porsche factory spec.