H&R Rear Sway Bar - BMW E85 Z4 Roadster

Sale price $386.10 Regular price $429.00

Black Friday price: $366.79 (applied in cart)

SKU: 71276

Add To Wishlist

The E85 Z4 has a sharp chassis, but the factory bars let it roll more than a roadster should. Stiffer adjustable bars cut that lean and make the car more responsive.

The H&R Rear Sway Bar (part 71276) is a 21mm bar that bolts in where the factory rear bar was. It has an adjustable 3-hole arm and drops straight into your E85 Z4 Roadster with no cutting or drilling.

Why Upgrade the Rear Sway Bar on Your BMW E85

A sway bar links the left and right wheels and resists body lean in corners. A stiffer bar means less roll and quicker response, while ride quality over bumps that hit both wheels stays close to stock.

A stiffer rear bar is the quickest way to reduce understeer. It shifts the balance toward the rear so the car rotates more willingly mid-corner. Go one step at a time if you track the car.

The adjustable arm gives you more than one setting. The hole closest to the bar body is the stiffest. Start in the softer hole on the street and move in for track days.

What's Included

  • H&R rear sway bar, 21mm

Key Features

  • 21mm rear bar, adjustable, 3-hole arm
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Genuine H&R part

Vehicle Fitment

The H&R Rear Sway Bar 71276 fits these US-market BMW models:

  • BMW E85 Z4 Roadster (2003-2008)

Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

Bolt-on install with hand tools, a torque wrench and a safe way to lift the car. Access to the rear bar varies by chassis. Professional installation is recommended.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Connect the end links to the hole you want on the adjustable arm. Use the same hole on both sides.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.