H&R Front Sway Bar 28mm - Porsche 991 911 Carrera / 981 Boxster / Cayman

Sale price $503.10 Regular price $559.00

Black Friday price: $477.94 (applied in cart)

SKU: 70880

Add To Wishlist

The 991 Carrera and the 981 Boxster and Cayman share a front axle design, and on both the front end rolls more than it needs to when you turn in hard. A stiffer front bar keeps the nose flatter and makes turn-in more precise.

The H&R Front Sway Bar (part 70880) is a 28mm front bar. It reuses the factory bushings and bolts in where the factory bar was, with no cutting or drilling.

Why an H&R Front Sway Bar on Your Porsche

A sway bar links the left and right wheels. When the car leans in a corner, the bar twists and pushes back, keeping the body flatter. A stiffer bar means less lean, quicker response to the wheel and a car that settles faster in transitions. Unlike stiffer springs, a sway bar only works when one side compresses more than the other, so ride quality over bumps that hit both wheels stays close to stock.

Stiffening only the front bar shifts the balance toward understeer. If you want to keep the factory balance, pair it with the matching H&R rear bar, or choose the complete H&R sway bar kit for your car.

What's Included

  • H&R front sway bar, 28mm

Product photo shows a representative H&R sway bar. Color, shape and packaging vary by application.

Key Features

  • 28mm front bar
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Cuts body roll while keeping ride quality over bumps close to stock
  • Genuine H&R part, matched to these models by H&R
  • H&R part number 70880

Vehicle Fitment

The H&R Front Sway Bar 70880 fits these Porsche models:

  • Porsche 991 911 Carrera and Carrera S Coupe and Cabriolet (2012-2019, RWD)
  • Porsche 991 911 Carrera 4 and Carrera 4S Coupe and Cabriolet (2013-2019, AWD)
  • Porsche 981 Boxster and Boxster S (2013-2016)
  • Porsche 981 Cayman and Cayman S (2014-2016)

Not for 911 Turbo, GTS or GT models, or cars with PDCC (Porsche Dynamic Chassis Control). Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

This is a bolt-on job with basic hand tools, a torque wrench and a way to safely lift the car. Access to the bars varies by model, and some panels or other parts have to be moved out of the way first. Professional installation is recommended if you are not comfortable working on suspension.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Connect the end links.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to Porsche factory spec.