H&R Front Sway Bar - BMW E85 Z4 Roadster

Sale price $413.10 Regular price $459.00

Black Friday price: $392.44 (applied in cart)

SKU: 70276

Add To Wishlist

The E85 Z4 has a sharp chassis, but the factory bars let it roll more than a roadster should. Stiffer adjustable bars cut that lean and make the car more responsive.

The H&R Front Sway Bar (part 70276) is a 27mm bar that bolts in where the factory front bar was. It has an adjustable 2-hole arm and drops straight into your E85 Z4 Roadster with no cutting or drilling.

Why Upgrade the Front Sway Bar on Your BMW E85

A sway bar links the left and right wheels and resists body lean in corners. A stiffer bar means less roll and quicker response, while ride quality over bumps that hit both wheels stays close to stock.

A stiffer front bar reduces lean at the front and makes the car feel more stable and precise on turn-in. Pair it with the matching H&R rear bar if you want to keep the factory front-to-rear balance.

The adjustable arm gives you more than one setting. The hole closest to the bar body is the stiffest. Start in the softer hole on the street and move in for track days.

What's Included

  • H&R front sway bar, 27mm

Key Features

  • 27mm front bar, adjustable, 2-hole arm
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Genuine H&R part

Vehicle Fitment

The H&R Front Sway Bar 70276 fits these US-market BMW models:

  • BMW E85 Z4 Roadster (2003-2008)

Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

Bolt-on install with hand tools, a torque wrench and a safe way to lift the car. Access to the front bar varies by chassis. Professional installation is recommended.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bar and remove the bushing brackets.
  3. Remove the factory bar and fit the H&R bar in its place, following the instructions supplied with the bar.
  4. Connect the end links to the hole you want on the adjustable arm. Use the same hole on both sides.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.