H&R Front + Rear Sway Bar Kit - BMW F22 M235i/M240i / F30 335i/340i / F32/F33/F36 435i/440i (xDrive)

Sale price $710.10 Regular price $789.00

Black Friday price: $674.59 (applied in cart)

SKU: 72878-3

Add To Wishlist

A 340i xDrive or 440i xDrive puts its power down in any weather, but the extra weight up front makes the car lean and wash wide when you push into a tight corner. This H&R sway bar kit for the six-cylinder xDrive F22, F30, F34 and F32 cars stiffens both ends to keep the body flat and the steering more direct.

The H&R Front + Rear Sway Bar Kit (part 72878-3) replaces both factory bars on your F22 M235i/M240i / F30 335i/340i / F32/F33/F36 435i/440i (xDrive). You get a 28mm front bar (adjustable, 2-hole arm) and a 20mm rear bar (non-adjustable), matched by H&R as a set so the car stays balanced front to rear.

Why Upgrade the Sway Bars on Your BMW F22 / F30 / F34 / F32 / F33 / F36

A sway bar links the left and right wheels and resists body lean in corners. A stiffer bar means less roll and quicker response, while ride quality over bumps that hit both wheels stays close to stock.

Changing both bars together keeps the balance H&R designed for the car. If you only want to change how the car turns in, a front bar alone adds stability. A rear bar alone makes the car rotate more.

The adjustable arm gives you more than one setting. The hole closest to the bar body is the stiffest. Start in the softer hole on the street and move in for track days.

What's Included

  • H&R front sway bar, 28mm
  • H&R rear sway bar, 20mm

Key Features

  • 28mm front bar, adjustable, 2-hole arm
  • 20mm rear bar, non-adjustable
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Genuine H&R part

Vehicle Fitment

The H&R Front + Rear Sway Bar Kit 72878-3 fits these US-market BMW models:

  • BMW F22 M235i xDrive Coupe (2015-2016)
  • BMW F22 M240i xDrive Coupe (2017-2020)
  • BMW F30 335i xDrive Sedan (2013-2015)
  • BMW F30 340i xDrive Sedan (2016-2018)
  • BMW F34 335i xDrive Gran Turismo (2013-2016)
  • BMW F34 340i xDrive Gran Turismo (2017-2019)
  • BMW F32 435i xDrive Coupe (2014-2016)
  • BMW F32 440i xDrive Coupe (2017-2020)
  • BMW F33 435i xDrive Convertible (2014-2016)
  • BMW F33 440i xDrive Convertible (2017-2020)
  • BMW F36 435i xDrive Gran Coupe (2015-2016)
  • BMW F36 440i xDrive Gran Coupe (2017-2020)

Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

Bolt-on install with hand tools, a torque wrench and a safe way to lift the car. Access to the bars varies by chassis. Professional installation is recommended.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bars and remove the bushing brackets.
  3. Remove the factory bars and fit the H&R bars in their place, following the instructions supplied with the kit.
  4. Connect the end links to the hole you want on the adjustable arm. Use the same hole on both sides.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.