H&R Front + Rear Sway Bar Kit - BMW E89 Z4 sDrive30i / sDrive35i / sDrive35is

Sale price $742.50 Regular price $825.00

Black Friday price: $705.37 (applied in cart)

SKU: 72987

Add To Wishlist

The E89 Z4 is a comfortable hardtop roadster, but the softer factory setup lets the body lean when you push it. Stiffer bars make it feel tighter and more eager to turn in.

The H&R Front + Rear Sway Bar Kit (part 72987) replaces both factory bars on your E89 Z4 sDrive30i / sDrive35i / sDrive35is. You get a 27mm front bar (non-adjustable) and a 21mm rear bar (adjustable, 3-hole arm), matched by H&R as a set so the car stays balanced front to rear.

Why Upgrade the Sway Bars on Your BMW E89

A sway bar links the left and right wheels and resists body lean in corners. A stiffer bar means less roll and quicker response, while ride quality over bumps that hit both wheels stays close to stock.

Changing both bars together keeps the balance H&R designed for the car. If you only want to change how the car turns in, a front bar alone adds stability. A rear bar alone makes the car rotate more.

The adjustable arm gives you more than one setting. The hole closest to the bar body is the stiffest. Start in the softer hole on the street and move in for track days.

What's Included

  • H&R front sway bar, 27mm
  • H&R rear sway bar, 21mm

Key Features

  • 27mm front bar, non-adjustable
  • 21mm rear bar, adjustable, 3-hole arm
  • Bolt-on replacement for the factory bar, no cutting or drilling
  • Genuine H&R part

Vehicle Fitment

The H&R Front + Rear Sway Bar Kit 72987 fits these US-market BMW models:

  • BMW E89 Z4 sDrive30i / sDrive35i / sDrive35is (2009-2016)

Not sure which version you need? Send us your VIN and we will confirm.

Installation Notes

Bolt-on install with hand tools, a torque wrench and a safe way to lift the car. Access to the bars varies by chassis. Professional installation is recommended.

  1. Raise the car and support it on stands or a lift.
  2. Disconnect the end links from the factory bars and remove the bushing brackets.
  3. Remove the factory bars and fit the H&R bars in their place, following the instructions supplied with the kit.
  4. Connect the end links to the hole you want on the adjustable arm. Use the same hole on both sides.
  5. With the car back on its wheels at ride height, torque the bushing brackets and end links to BMW factory spec.