Four doors do not make the F80 M3 any less serious on track. The Fall-Line Motorsports Bolt-In Harness Bar gives you a solid harness anchor and rollover protection behind the front seats, and it bolts in, so the car stays uncut.
Fall-Line has built BMW race cars for more than 15 years.
F80 M3 Harness Bar: GTS or GT3
Mandrel bent from 1.75 inch x 0.083 inch wall chromoly and fully TIG welded. GTS is the clean bar. GT3 adds CNC-machined lightweight gussets and a gusseted cross brace. Custom paint finishes are available on request. Special order, made in the USA.
What's Included
- 1 x Fall-Line Motorsports bolt-in harness bar in the selected style
Key Features
- 1.75 x 0.083 inch chromoly tubing, mandrel bent, TIG welded
- GTS (no gussets) or GT3 (lightweight gussets and gusseted cross brace)
- Bolt-in design, no welding to the chassis
- Made in the USA, special order
- Part numbers: FLM-F80-RB-GTS, FLM-F80-RB-GT3
Vehicle Fitment
Fits the following model:
- BMW F80 M3 Sedan (2015-2018)
Installation Notes
Rear seat removal is required. Professional installation is recommended. This bar may not comply with all race sanctioning bodies and technical regulations, so check your series rules first.
- Remove the rear seat and interior trim at the mounting points.
- Position the bar and mark the mounting locations.
- Bolt the bar in with backing plates and torque all hardware.
- Mount harnesses per the harness manufacturer instructions.
