Lower an E36 or E46 and you end up with more rear camber than the factory arms can correct. The Fall-Line Motorsports Race Adjustable Rear Camber Arm Kit gives you precise control over rear camber and toe, and it holds the setting once it is tightened.
No more alignments that move the moment the jam nut is torqued.
Shim-Adjusted Camber with a Stainless Spherical Bearing
A shim insert at one end sets camber and toe with pinpoint precision, so nothing shifts during final tightening. The other end carries one of the largest stainless steel spherical bearings available, far tougher than the soft aluminum bearings in jam-nut designs. Replaces BMW 33-32-6-770-813 and 33-32-6-770-824. Made in the USA.
What's Included
- 1 x Fall-Line Race adjustable rear camber arm kit (left and right)
Key Features
- Replaces BMW 33-32-6-770-813 and 33-32-6-770-824
- Shim-type adjustment for camber and toe
- Large stainless steel spherical bearing
- Alignment does not shift when tightened
- Made in the USA
- Part number: FLM-E46-1FRAC
Vehicle Fitment
Fits the following models:
- BMW E36 3 Series and M3 (1992-1999)
- BMW E46 3 Series and M3 (1999-2006)
- BMW E85 / E86 Z4 and Z4 M (2003-2008)
- BMW E83 X3 (2004-2010)
Installation Notes
Professional installation is recommended. An alignment is required.
- Remove the factory rear upper camber arms.
- Install the Fall-Line arms with the baseline shim stack.
- Torque at ride height.
- Align the car, adjusting shims to reach target camber and toe.
