Dinan Turbo Inlet Fit Kit - BMW G01 X3 M40i / G02 X4 M40i (2020-2025)

Sale price $52.95 Regular price $65.95

Black Friday price: $50.30 (applied in cart)

SKU: DNND763-0101

Add To Wishlist

You bought the Dinan turbo inlet for the sound: more turbo spool and intake noise every time you get into the throttle. Then you find out the inlet will not seal to the intake on your X3 or X4 M40i. This is the small part that makes it fit.

The Dinan turbo inlet fit kit (part number D763-0101) adapts the Dinan B58 turbo inlet (D760-0062) to either the factory intake or the Dinan cold air intake for the X3 and X4 M40i (D760-0075). Dinan is clear on this: without the fit kit, the turbo inlet will not mate to the intake on these cars.

When You Need the Dinan Turbo Inlet Fit Kit

If you drive a G01 X3 M40i or G02 X4 M40i and you are installing the Dinan turbo inlet, you need this kit. That applies whether you keep the factory airbox or run Dinan's intake for maximum sound. If you are not running the Dinan turbo inlet, you do not need it.

The kit is an O-ring and a spring clip that create a sealed, positive connection at the inlet joint. Buying it with the inlet saves a second order and a car sitting half-apart in the garage.

What's Included

  • 1 x O-ring
  • 1 x Spring clip

Turbo inlet (D760-0062) and intake (D760-0075) sold separately.

Key Features

  • Required to mate the Dinan turbo inlet to the intake on X3 and X4 M40i
  • Works with the factory intake or the Dinan X3/X4 M40i cold air intake
  • O-ring seal and spring clip retention
  • Dinan-rated 0.5 hour installation

Vehicle Fitment

Fits these B58-powered BMW models when used with the Dinan turbo inlet:

  • BMW X3 M40i / G01 (2020-2024)
  • BMW X4 M40i / G02 (2020-2025)

Not for 2018-2019 X3 M40i or 2019 X4 M40i, the 2025+ G45 X3 M50, or the X3M and X4M (S58).

Installation Notes

Install the fit kit at the same time as the Dinan turbo inlet. Dinan rates the fit kit at half an hour; the turbo inlet itself is about an hour. Lubricating the O-ring and taking your time with the PCV line connection makes the job easier.

  1. Follow the Dinan turbo inlet instructions to remove the factory turbo inlet.
  2. Fit the supplied O-ring to the inlet joint and lightly lubricate it.
  3. Press the Dinan turbo inlet and intake together until fully seated.
  4. Install the spring clip to lock the joint and confirm the connection cannot pull apart.
  5. Reconnect the PCV line and any sensors, then start the engine and check for leaks.