You fitted a Dinan carbon fiber intake to hear your B58 or B48 breathe. Months of road grime later, a loaded filter is quietly choking that airflow back down. Service time should not mean settling for a generic cone that almost fits.
This Dinan Replacement Air Filter is the correct service filter for the Dinan carbon fiber cold air intake on the BMW G20 3 Series, G22 4 Series, G42 2 Series, G29 Z4 and Toyota GR Supra. It is the same deep-pleated cotton filter that ships in the intake kit, with custom-molded ends shaped to seal inside the Dinan airbox. A filter that does not seal lets dirty air slip past the media and straight to the turbo.
Why a Genuine Dinan Replacement Air Filter Matters
Deep pleats in multi-layered cotton give the filter a large working surface for flow and filtration. A steel wire mesh supports the media so it keeps its shape and resists dents, and the molded ends use every bit of filter area the enlarged Dinan airbox allows. It drops in exactly where the original sat. No trimming, no adapters.
One thing to check first: this filter is for cars already running a Dinan carbon fiber intake. It does not fit the factory BMW or Toyota airbox. If your car still has the stock airbox, you want the Dinan drop-in replacement filter instead, sold separately. Dinan part number D401-0027. Sold by AutoTecknic, an authorized Dinan dealer.
What's Included
- 1 x Dinan replacement air filter
Key Features
- Correct service filter for Dinan intakes D760-0052, D760-0055, D760-0058, D760-0059, D760-0065 and D760-0066
- Deep-pleated multi-layer cotton media
- Steel wire mesh for strength and dent resistance
- Custom-molded ends for a full seal inside the Dinan airbox
- Direct replacement for the filter supplied with your Dinan intake
- Sold individually
Vehicle Fitment
Fits these vehicles when equipped with a Dinan carbon fiber cold air intake:
- BMW 330i / G20 (2019-2024)
- BMW M340i / G20 (2020-2026): M340i, M340i xDrive
- BMW 430i / G22 Coupe, G23 Convertible, G26 Gran Coupe (2021-2024)
- BMW M440i / G22 Coupe, G23 Convertible, G26 Gran Coupe (2021-2026)
- BMW 230i / G42 Coupe (2022-2026)
- BMW M240i / G42 Coupe (2022-2026): M240i, M240i xDrive
- BMW Z4 sDrive30i / G29 (2019-2026)
- BMW Z4 M40i / G29 (2020-2026)
- Toyota GR Supra 3.0 / A90, A91 (2020-2026)
- Toyota GR Supra 2.0 / A90 (2021-2024)
Does not fit the factory airbox on any of these cars.
Installation Notes
A filter swap takes a few minutes with basic hand tools. Cover the intake opening while the old filter is out so nothing drops toward the turbo.
- Open the Dinan airbox lid.
- Loosen the clamp and remove the old filter.
- Seat the new Dinan filter fully on its mount and tighten the clamp evenly.
- Close the airbox and confirm every clamp and coupler is secure.
