Your mirror caps are the part of the car you look at more than any other exterior panel. Every lane change, every glance over your shoulder, there they are in painted plastic. On an M car that already has carbon everywhere else, it is the one detail that looks forgotten.
The Dinan Gloss Carbon Fiber Mirror Cover Set brings real carbon to the BMW G87 M2, G80 M3 and G82/G83 M4. Each cover is 100% genuine 2x2 gloss twill dry carbon fiber, manufactured from pre-preg and clear coated for UV protection and fade resistance. Not a wrap, not a hydro-dip. Real weave you can see from the driver's seat.
Why These Dinan Carbon Fiber Mirror Covers Fit Like Factory Parts
These are precision-formed overlays that go over your factory mirror caps, so nothing has to be pried apart or removed from the mirror housing. That matters if you are nervous about breaking clips on a new car. Dinan builds them to be impact resistant and durable, and the clear coat keeps the gloss from going cloudy in the sun. They are sold as a pair, so both sides match.
Install Time and Compatibility
Installation uses 3M double-sided tape for a clean fit and finish, and Dinan quotes about 0.8 hours of labor for the pair. Most owners do this at home in a garage. Because they are exterior trim pieces, emissions and tuning are not a factor. Dinan part number D980-0033. Sold by AutoTecknic, an authorized Dinan dealer.
What's Included
- Two gloss 2x2 twill carbon fiber mirror covers (left and right)
- 3M double-sided tape
Key Features
- 2x2 gloss twill dry carbon fiber, manufactured from pre-preg
- Overlay design installs over the factory mirror caps
- Clear coated for UV protection and fade resistance
- Impact resistant, durable construction
- 3M double-sided tape attachment, about 0.8 hours of labor
- Sold as a matched pair
Vehicle Fitment
Fits the following BMW M models:
- BMW M2 / G87 Coupe (2023-2026): M2
- BMW M3 / G80 Sedan (2021-2026): M3, M3 Competition, M3 Competition xDrive
- BMW M4 / G82 Coupe (2021-2026): M4, M4 Competition, M4 Competition xDrive
- BMW M4 / G83 Convertible (2022-2026): M4 Competition xDrive Convertible
Installation Notes
A straightforward DIY job. The only thing that decides how well tape holds is surface prep, so take your time on step one. Follow the Dinan instructions included with the set.
- Wash and fully dry both factory mirror caps.
- Test fit each cover before peeling the tape backing and confirm the edges line up.
- Peel the 3M tape backing and press each cover firmly into place over the factory cap.
- Hold even pressure around the edges so the tape bonds across the full surface.
- Check both covers for a flush fit before driving.
