CSF Front Mount Heat Exchanger w/ Rock Guard - BMW F8X M3 / M4 / M2 Competition

Regular price $699.95

Black Friday price: $664.95 (applied in cart)

SKU: CSF8075

Add To Wishlist

Do a few back-to-back pulls on an S55 and you can feel it: power fades as intake temperatures climb. The factory heat exchanger simply cannot shed heat fast enough during sustained hard driving.

The CSF 8075 front mount heat exchanger attacks the biggest weak point in the S55 charge cooling system, with a larger core and a rock guard to protect it.

Fix S55 Heat Soak at the Source

The ideal setup pairs this heat exchanger with the CSF top mount charge-air cooler, but CSF found you can see significant improvement with the heat exchanger alone. If you can only start with one part, start here, because removing heat from the system is the bigger of the two bottlenecks.

True Drop-In Fit

The CSF heat exchanger accepts all attaching OEM components, including the quick-connect hoses, mounting brackets, OEM X-brace, and all air ducting and shrouding. No modifications are required.

What's Included

  • (1) CSF 8075 front mount heat exchanger
  • (1) Rock guard

Key Features

  • Larger core to pull more heat from the low-temperature circuit
  • Integrated rock guard against road debris
  • Reuses factory quick-connect hoses, brackets, X-brace, and ducting
  • Pairs with CSF 8082 / 8082R top mount charge-air cooler
  • Also available in black as CSF 8075V
  • CSF part number 8075

Vehicle Fitment

CSF 8075 fits the following S55-powered BMW models:

  • BMW F80 M3 (2015-2018)
  • BMW F82 / F83 M4 including Competition, GTS and CS (2015-2020)
  • BMW F87 M2 Competition and M2 CS (2019-2021)

Does not fit the N55-powered F87 M2 (2016-2018). Send us your VIN if you are unsure.

Installation Notes

This install requires removing the front bumper. A shop with S55 experience is a good choice if you have not bled the low-temperature circuit before.

  1. Drain the low-temperature (charge cooling) coolant circuit.
  2. Remove the front bumper and undertray to access the heat exchanger.
  3. Swap in the CSF heat exchanger, reusing the quick-connect hoses, brackets, X-brace, and ducting.
  4. Install the rock guard and reinstall the bumper.
  5. Refill the low-temperature circuit and bleed it with the electric pump bleed procedure.