CSF Aluminum Radiator - BMW E36 M3 / 320i / 323 / 325 / 328

Sale price $395.95 Regular price $415.00

Black Friday price: $376.15 (applied in cart)

SKU: CSF3054

Add To Wishlist

Your E36's factory radiator uses plastic end tanks, and after decades of heat cycles those tanks are the most likely part of the cooling system to crack. When it lets go on a track day or a hot summer drive, you're on the shoulder watching the temperature needle climb.

The CSF 3054 aluminum radiator replaces it with an all-aluminum unit and a more efficient core, built to drop into the stock location on the E36 M3 and 3-Series with no cutting or modification.

Why Upgrade Your E36 Radiator

Removing the plastic end tanks eliminates the weak point that strands so many E36 owners. The larger aluminum core gives you more cooling headroom for track days, hot climates, and modified S50, S52, M50, and M52 engines, so temperatures stay stable when you push the car.

Direct Fit, No Modification

CSF designed the 3054 as a true drop-in replacement. It uses the factory fan shroud, hose connections, and mounting points. The thicker core tightens clearances slightly, but it is not a fitment issue.

What's Included

  • (1) CSF 3054 aluminum radiator

Key Features

  • All-aluminum construction with no plastic end tanks
  • High-efficiency core for street and track cooling
  • Drop-in fit using factory mounting points, shroud, and hoses
  • Replaces BMW part numbers 17111723784, 17111728908, 17111723694, and 17112241912
  • CSF part number 3054

Vehicle Fitment

CSF 3054 fits the following BMW E36 models:

  • BMW E36 M3 (1993-1999)
  • BMW E36 320i (1992-1995)
  • BMW E36 323 (1992-1998)
  • BMW E36 325 (1992-1998)
  • BMW E36 328 (1994-1998)

Not sure which radiator your car needs? Send us your VIN before you order and we will confirm fitment.

Installation Notes

A radiator swap is a manageable job for a home mechanic with basic tools. Plan on two to three hours, including a full coolant bleed.

  1. With the engine fully cold, drain the coolant from the factory radiator.
  2. Remove the fan and fan shroud, then disconnect the hoses and the coolant level sensor.
  3. Lift out the factory radiator and set the CSF unit into the factory mounts.
  4. Reconnect the hoses and sensor, then reinstall the shroud and fan.
  5. Refill with BMW-approved coolant and bleed the system completely until no air remains.